|
Slik Pro 624 CF 4-Section Carbon Fiber Tripod |
|
The Mini version of the PRO 634 CF, the PRO 624 CF has for short leg sections that extend to a maximum height of 47.4 inches but close down to remarkable 16.3 inches. With a weight of 1.8 lbs this tripod is an easy traveler that can be used in situations where a full-sized tripod would not be needed or not be convenient to carry.
Features of the SLIK PRO CF Carbon Fiber Series
Multi-layered Carbon Fiber Carbon Fiber material is actually comprised of layers of woven carbon strands that are then baked together in a high-pressure furnace. When finishes this material is as much as 40% lighter than aluminium and very rigid, making it for applications from space vehicles to tripod legs. Slik sources it’s carbon fiber tubing in Europe from a manufacturer that specializes in carbon fiber.
A.R.S (Ant-Rotational System) All the New SLIK PRO carbon fiber tripods feature a new A.R.S (Ant-Rotational System) designed into the legs and log locks. The A.R.S. systems prevent the leg tubes from rotating inside each other making it much easier to lock and release all the twist-release locks securely. The size of the rubber grips have also been increase in diameter to make them easier to operate.
Leg-Lock Type Twist lock system with double nut ring (crown-cap) type (PAT.).
Multi-Angle Leg Locks Each leg has an independent lock that sets in one 3 angles to vary the height and stance of the tripod. The three setting are for maximum height, waist level or low angle photography close to the ground. It also makes it easier to set up the tripod on uneven ground, steps or rocks.
Built-in Short Columns The center columns unscrew into two piece to create a much shorter column for use in low angle photography.
|
|
|