CA501000PLSS

0438C004

Canon

Add a cinema zoom lens to your broadcast studio, sports, or event camera with full servo capability with this CINE-SERVO 50-1000mm T5.0-T8.9 PL Lens with SS-41-IASD Kit put together by Canon. The kit includes the CINE-SERVO 50 to 1000mm T5.0 to T8.9 PL-mount lens and the SS-41-IASD full servo kit. The cine servo lens features a 50 to 1000mm zoom with a 1.5x extender that allows 75 to 1500mm zoom, and it supports 4K resolutions even with the extender enabled. It also features a mini LCD, an 11-blade iris, a 12-pin control connector, a zoom rocker, and a T5 to T8.9 aperture range. The SS-41-IASD kit provides everything you need to extend servo control to the lens and includes an FPD-400D focus controller, a ZSD-300D digital servo zoom demand, and two IAS 20p cables. ript20x Zoom Range The lens features a 20x zoom range of 50 to 1000mm, which is very long for a lens that supports the Super35 format. A built-in 1.5x extender allows you to increase the zoom range to 75 to 1500mm while still supporting 4K resolution.Suitable for Shoulder Mounted Camera Operation The lens features the form factor and control layout of typical ENG lenses and is designed to be friendly for a single camera operator to control while using the camera shoulder mounted. The zoom servo is controlled by rocker with the right hand and focus and iris can be operated manually with the left handVariable Speed Servo High speed servo-driven zoom and iris is available for critical situations such as while filming sports or fast action. Meanwhile, slower speed settings are available for more expressive work. With this variability, the zoom duration can be set to last anywhere from 1.5 to 180 secondsImmediate System Startup The drive unit features a high-performance encoder so that the lens requires no initialization. This means the system can be used immediately without any delay waiting for it to boot upSupports Virtual Image Data Output Via three 20-pin connectors below the servo, it is possible to connect an external system to collect 16-bit virtual image dataStandard Broadcast 12-Pin Camera Interface Cable The lens features the same 12-pin camera interface for power and serial data as found on regular Canon broadcast lensesBroadcast Lens-Style Focus Ring In addition to servo zoom, focus, and iris, another ENG-derived feature is the knurled focus ring, which is limited to a 180 rotationFlange-Back Adjustment The flange back may be adjusted in the same manner as on broadcast lenses to simplify the transition between different camera systems with different flange focal distancesFully Closing Iris The iris may be closed fully for setting camera black balance or other calibration proceduresDetachable Drive Unit The motor unit housing the servo motors and zoom rocker may be removed for cinema style shooting where full manual control is preferredSupports Super 35mm Image Sensors The lens provides a sufficiently large image circle to cover a Super 35mm sensorSupport for Cinema Lens Accessories The lens is compatible with a wide array of accessories common in the cine industry, including matte boxes, follow focuses, and electronic and wireless controllers. The focus ring features both a 0.8mm MOD cine standard gear ring as well as a 0.5 Canon MOD ring, the zoom features a 0.5 Canon MOD, and there is also a 0.5 MOD iris gearCompatible with Lens Support Because of the weight of the lens, it is often deemed helpful or necessary to support the lens using a 19mm rod system. This lens makes that possible by allowing you to attach a lens supportLens-to-Camera Metadata Transmission The lens supports the Cooke/i Lens Camera Data protocols through contacts built into the PL-mount. This allows lens metadata such as zoom setting and iris to be recorded in the camera. Note that a firmware update may be required for proper communications between the lens and the camera.Serviceable Lens Mounts The lens mount can be swapped between PL and Canon EF only by an authorized Canon service Fac