BEPMP4000V2

0601-ADE86-US1

Behringer

Mix your band while powering your favorite PA speakers with the Behringer Europower PMP4000, a 16-channel powered PA mixer with an integrated 1600W amplifier, 7-band graphic EQ with FBQ technology, and a digital effect engine, well suited for touring bands, clubs, bars, and more. The Class-D amplifier delivers up to 800W per channel at 4 ohms to drive a pair of PA loudspeakers.The mixer features XLR and 1/4" inputs on mono channels and 1/4" inputs on stereo channels. Inputs 9/10 and 11/12 also feature stereo RCA inputs. Channels 1 to 8 include 1/4" inserts for adding your favorite outboard effects. The mixer includes two main outputs, two monitor sends, and one effect send, which connects to the onboard DSP with over 100 presets. Each channel includes a 3-band EQ with sweepable mids to dial in your best sound. A power cord is included.At a Glance Ultracompact 2 x 800W stereo powered mixer (1600W bridged mode)Remarkable Class-D amplifier technology: enormous power, incredible sonic performance and super-light weightUltracompact design at nearly half the weight of conventional powered mixers16-channel mixer section features 8 mono and 4 stereo channels plus separate CD/Tape input/outputStudio-grade 24-bit stereo FX processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effectsRevolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal8 high-quality XENYX mic preamps with switchable +48 V phantom power for condenser microphonesEffective, musical 3-band EQ, switchable low-cut filter, and clip LEDs on all mono channelsStereo 7-band graphic EQ allows precise frequency correction of monitor or main outputsVoice Canceler function removes singer's voice from recordings for karaoke applicationsSelectable stereo (main L/R), double mono (main/monitor), or bridged mono amplifier operation modeXPQ 3D stereo surround effect adds vitality and an enhanced stereo imageAdjustable stereo CD/tape input for connecting external signal sourcesMultifunctional stereo preamp outputs for added flexibilityInternal switch-mode power supply, noise-free audio, superior transient response, and very low power consumptionAll-In-One Solution The powerful PMP4000 gives you the choice of 2 x 800W stereo or 2 x 800W dual mono mode (mains-powered output, 1 Monitor sends signals through the second powered input) or 1600W bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP4000 can accommodate it. This sonic versatility also makes it an excellent choice for houses of worship where vocals and stereo recordings often share face time.Remarkable Mic Preamps The PMP4000 features high headroom XENYX mic preamps, which have been praised by audio engineers all over the world. These state-of-the-art mic pres represent a major step in the evolution of audio technology, and they can easily hold their own, even when compared to the most expensive standalone mic preamps. XENYX preamps offer a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz.Digital Multi-FX Processor Equipped with two studio-grade 24-bit Multi-FX processors, the PMP4000 mixer gives you 100 mind-blowing digital effect presets such as delay, chorus, reverb, and much more. Apply them to any channel, or to the monitors and main output. Of course, if you have treasured outboard gear to which you've grown attached, these mixers can integrate them into the mix while bypassing the built-in FX processor.FBQ Feedback Elimination Utilizing an ultrafast feedback detection system, this ingenious circuitry helps you recognize and tame feedback frequencies immediately. When feedback is sensed in a specific frequency range, the LED on the associated EQ fader illuminates, showing you at a glance which fader to lower to overcome the feedback.Special Features The PMP4000 comes equipped