BE110VCOFA

0720-AAC86-001

Behringer

Build the instrument of your dreams with the Behringer 110 VCO/VCF/VCA, a complete synth voice with an internal patched signal flow for ease of use. This Eurorack module is an authentic reproduction of the original System 100M circuitry and features a VCO, VCF, and VCA.The VCO offers three waveforms including triangle, ramp, and square wave with pitch control, covering a wide range, plus one audio output and two CV inputs. The VCF features cutoff and resonance controls and includes two audio inputs and two CV inputs. The VCA offers gain control plus two audio inputs, two audio outputs (low/high), and two CV inputs. In total, there are 17 controls and switches that provide real-time access to all important parameters. The 110 VCO/VCF/VCA ships with a ribbon power cable and mounting screws.Benefits Remarkable VCO/VCF/VCA module from the '80sAuthentic reproduction of original System 100M circuitryComplete synth voice with internal patched signal flow for ease of useVCO features 3 selectable waveforms (triangle, ramp, and square with PWM)VCO offers pitch control over a wide range plus 1 audio output and 2 CV inputsVCF features cutoff, frequency, and resonance controls, plus 2 audio inputs and 2 CV inputsOscillator PWM with manual and external CV controlVCA features gain control plus 2 audio inputs, 2 audio outputs (low/high), and 2 CV inputs17 controls and switches give you real-time access to all important parametersControlling the Oscillator The 110 comes with a complete synth voice with an internally patched signal flow for ease of use and to save patching time, so you can focus on your music. You can vary the VCO section by selecting one of three waveforms triangle, ramp, and Pulse Width Modulation, which can be adjusted by the Mod Manual knob. The VCO also offers pitch and range control knobs, as well as one audio output, which can be routed to another source, and two CV inputs.VCF and VCA The VCF features cutoff frequency and resonance sliders while the VCA comes with two audio outputs (low/high). Both the VCF and VCA each feature their own two audio inputs and two CV inputs that allow for other sources to be plugged into the 110, making it a must-have in any modular synth.Eurorack Ready Installing the 110 VCO/VCF/VCA is simple, as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply, and mount the module using the included screws. This allows for the 110 VCO/VCF/VCA to be mixed with other synth modules for a truly unique setup.Horizontal Pitch: 16 HPPower Requirements: 60mA +12V, 50mA -12V