MA200XEDVI

11070

Magewell

The Pro Capture Dual DVI HD Capture Card (Two Channels) from Magewell is a normal-profile PCIe 2.0 x4 card that allows for capturing two channels of DVI, VGA, Component, or HDMI + embedded audio via the two DVI inputs and supplied breakout cables. The card supports various color sampling modes, color depths, color formats, up to 8 audio channels at 48 kHz (HDMI only), and output resolutions up to 2048 x 2048 with frame rates up to 120 fps. The card is also capable of numerous video processing features, including cropping, scaling, de-interleaving, aspect ratio conversion, color format conversion, video frame rate conversion, and video OSD composition.Pro Capture Dual DVI supports multiple cards per system and unlimited output streams for any one input channel with independently adjustable parameters per stream. Additional features include ultra-low latency, timestamp and A/V synchronization, and LED status indicators. The card supports both Windows, Mac, and Linux operating systems, with multiple APIs for Windows and Linux, and with Windows SDKs for easier integration.General Supports auto scanning of video input sources when there is no signal input to the currently selected input source Supports manual selection of video input source, auto selection of linked (embedded) audio input source when the video input source changes, and manual selection of audio input source Supports standard crossbar based on video input source selection Supports input video resolutions up to 2048 x 2048VGA & Component Input 12-bit ADCSupports RGB & YCbCr (YUV) color formatsSupports separated sync, composite sync, sync-on-green (SOG), and sync-on-luminance (SOY)Supports DMT, CEA, CVT, GTF video timingsInput signals up to 165 MHz pixel rate are digitized with 1:1 sampling whereas signals over 165 MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss; not officially supported)Auto detection of RGB & YCbCr color formatsAuto or manual sampling phase adjustmentAuto horizontal alignmentSupports customized video timingsSupports customized video resolutions for CVT/GTF timingsHDMI Input 225 MHz HDMI receiverAdaptive HDMI equalizer support for cables lengths up to 98'Supports customized EDIDSupports extraction of AVI/Audio/SPD/MS/VS/ACP/IRSC1/ISRC2/Gamut InfoFramesFull colorimetry supportSupports 8/10/12-bit color depthsSupports RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color samplingSupports up to 8-channel IEC60958/IEC61937 audio streamsSupports extraction of audio formation information & channel status data, video timing, 3D format information, and Sony/Canon DSLR time codeVideo Processing Two video processing pipelines with approximately 180MP/s processing bandwidth for eachSupports full 10-bit video processingVideo cropping and scalingVideo de-interlacing: weave, blend top & bottom field, top field only, bottom field onlyAspect ratio conversion with automatic or manual selection of input and output aspect ratiosThree aspect ratio conversion modes: ignore (anamorphic), cropping, or padding (letterbox or pillarbox)Supports video frame rate conversionSupports automatic and manual selection of input/output color formats and quantization ranges, and output saturation rangeSupports RGB, YCbCr 601, YCbCr 709, and YCbCr 2020 color formatsSupports limited or full quantization rangeSupports limited, full, and extended gamut saturation rangeSupports PNG OSD image of up to 2048 x 2048Supports dynamic loading of RGBA OSD image via SDKMultiple Cards per System Supports multiple cards in one systemOn-board rotary switch to set card number, with 16 positions from 0 to FSystem hardware device tree will display 01: Pro Capture AIO when rotary switch is set to 1, and so onThe video and audio device names displayed in your software will include the card number (set by the rotary switch)Multiple Output Streams Unlimited output streams for any one input channelIndependent cropping, aspect ratio, color format, resolution, frame rat