MA11170

11170

Magewell

Capture a single channel of 4K resolution video with embedded audio using the Magewell Pro Capture AIO 4K Capture Card. This PCI Express x 4 capture card is compatible with DCI 4K and UHD video formats up to 4096 x 2160, and ingests using either its HDMI or its SDI (BNC) ports. Capture uncompressed video and audio from a camera or switcher on your computer for recording, editing, or streaming. The low-profile Magewell AIO 4K is compatible with Windows, macOS, and Linux systems. Extraction of audio-formation and channel-status data, video-timing, Sony and Canon DSLR timecode, and 3D-format information is supported, as are multiple color spaces in 8- and 10-bit formats. Video processing features include frame-rate conversion, cropping, scaling, de-interlacing, and aspect-ration conversion. Multiple Magewell cards can be used and numbered in one system.HDMI-Specific Features 297 MHz HDMI receiver Adaptive HDMI equalizer Customized EDID support Extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames Full colorimetry support Support for 8-bit signals using RGB/YUV 4:4:4 color sampling at pixel rates no greater than 297 MHz Support for 12-bit signals using YUV 4:2:2 color sampling at pixel rates no greater than 297 MHz Support for 10/12-bit signals using RGB/YUV 4:4:4 color sampling at pixel rates no greater than 170 MHz Extraction of audio formation information, and channel status data supported Extraction of video timing information supported Extraction of 3D format information supported Extraction of Sony/Canon DSLR time code supported Side-by-Side Half, Top-and-Bottom, and Frame Packing 3D mode supported SDI-Specific Features Integrated cable equalizer supporting cable lengths up to 755' for HD signals Support for SD/HD/3Ga/3Gb/3Ga-DL/3Gb-DS/6G (SMPTE 2081) standards Support for 2K (2048 1080) & 4K (4096 2160) mode Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling Support for 10/12-bit color depth Support for extraction of SMPTE 352 payload identifier Support for up to 8 (mono) audio channels at 48 KHz (channels 1-8 from the 16 available in the SDI spec) Support for extraction of audio formation information & channel status data Limited support of 3Gb-DS: only the first stream can be captured Limited support for capture of the first link of dual link interfaces: YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60 YCbCr 4:4:4 10-bit: captured as 4:2:2 RGB 4:4:4: R/B sub-sampled Video Capture Formats Image-capture resolutions up to 4096 2160 pixels Capture frame rates up to 144 fps (Actual capture frame rate can be limited by PCIe bandwidth and image resolution) 4:2:0 8-bit capture formats: NV12, I420, YV12 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32 4:4:4 10-bit capture formats: V410, Y410 Additional capture formats are supported via Pro Capture SDK for DirectKS Video Processing Features Two video processing pipelines with ~360 MP/s processing bandwidth for each one Full 10-bit video processing Video cropping and scaling Video de-interlacing: Weave Blend top & bottom field Top field only Bottom field only Video aspect ratio conversion: Auto or manual selection of input aspect ratio Auto or manual selection of capture aspect ratio Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox) Video color format conversion: Auto or manual selection of input color format & quantization range Auto or manual selection of capture color format, quantization range & saturation range Supports RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats Supports Limited or Full quantization range Supports Limited, Full & 'Extended gamut' saturation range Video frame rate conversion Video OSD composition: Supports PNG OSD image (up to 4096 2160) Supports dynamic loading of RGBA OSD images via SDK