MA11524

11524

Magewell

The Eco Capture HDMI 4K M.2 Single-Channel Capture Card from Magewell allows you to connect an HDMI source to your computer and capture up to DCI 4K 4096 x 2160 resolution with embedded audio. Featuring an M.2 (PCIe 2.0) computer interface, this card provides the flexibility to be used in compact/thin tablet computers and other small form factor PCs where PCIe slots may be at a minimum. It's compatible with Windows and Linux operating systems and is capable of operating 24 hours a day, 7 days a week, while an LED indicator confirms the working state of the input the entire time (idle, input signal locked, memory failed, or FPGA configuration). The Eco Capture HDMI 4K M.2 Card also offers many processing and other features, including resolution scaling and a high-fidelity pipeline. The card has a native FPC input connector and comes with a matching FPC to HDMI type A adapter and a ribbon cable for connecting your HDMI signal.Key Features FPC connector supporting included FPC to HDMI adapters and ribbon cables Capture 4096 x 2160 DCI 4K resolution M.2 Interface (PCIe 2.0) Compatible with Windows and Linux Resolution scaling High-fidelity video processing pipeline Image control Various output color spaces SG-DMA transmission mode Multiple devices on one host Multiple replicated capture streams Hardware time stamp Mounting hole LED indicator Firmware upgradeable Common driver 24/7 continuous operation HDMI Specific Features 297 MHz HDMI receiverAdaptive HDMI equalizerCustomized EDIDExtraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFramesFull colorimetryRGB/YUV 4:4:4 8-bit and YUV 4:2:2 12-bit format signals with a pixel frequency of no more than 297 MHzRGB/YUV 4:4:4 10/12-bit format signals with a pixel frequency of no more than 170 MHzUp to 8-channel IEC60958/IEC61937 audio streamsExtraction of audio formation information and channel status dataExtraction of video timing informationExtraction of 3D format informationExtraction of Sony/Canon DSLR timecodeSide-by-Side Half, Top-and-Bottom, Frame Packing 3D modeVideo Capture Formats Image resolutions up to 4096 x 2160Frame rates up to 144 fps (actual capture frame rate can be limited by PCIe bandwidth and image resolution)4:2:0 8-bit capture formats: NV12, I420, YV124:2:2 8-bit capture formats: YUY2, YUYV, UYVY4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32More capture formats are supported via Magewell Capture SDK for DirectKSVideo Processing Features Video processing pipelines with 360 megapixels processing bandwidth8-bit 4:4:4 video processingCroppingScalingDeinterlacingVideo aspect ratio conversionColor format conversionAuto or manual selection of input color format and quantization rangeAuto or manual selection of capture color format, quantization range, and saturation rangeRGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formatsLimited or full quantization rangeLimited, full, and extended gamut saturation rangeFrame rate conversionVideo Deinterlacing Weave Blend top and bottom field Color Format Conversion Auto or manual selection of input color format and quantization range Auto or manual selection of capture color format, quantization range, and saturation range Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats Support for limited or full quantization range Support for limited, full, and extended gamut saturation range Multiple Cards per System Support for multiple cards plugged into one system On-board rotary switch to set card number with 16 positions System hardware device tree will display "01: Eco Capture HDMI 4K M.2" when the rotary switch is set to 0001, and so on The video and audio device names displayed in your software will include the card number (set by the rotary switch) Multiple Replicated Capture Streams Unlimited capture streams for any one input channel, but the capture streams should be in the same capture format Time Stamp and A/V Synchronization Hardware-based 100ns high-resolution clock Audio frames (192 audio samples) an