HA2101MKII

2101MK II

Hammond

The 2101MKII Leslie Rotary Speaker from Hammond delivers the classic "Sound-In-Motion" effect of a true rotor from a compact, 200W, 3-channel keyboard amplifier. The rotary channel's signal is separated with the highs reproduced by a mechanical horn rotor and the lows reproduced by two 5" speakers with digital rotor simulations. Both the mechanical and digital rotors operate in two modes: Fast (Tremolo) or Slow (Chorale). The stationary left and right channels accommodate signals from another sound source such as a synthesizer or external sound module and utilize the same two 5" low frequency drivers along with two additional 2" soft-dome tweeters for high frequencies. There are 16 different functions for both rotors, which may be saved to two presets for instant recall via select button, foot switch, or MIDI program change messages. The amplifier's enclosure is constructed from impact-resistant MDF with a black leather-like finish. The 2101MKII ships with the FS-9H foot switch and a standard IEC power cable. Control Panel11-Pin Socket Allows direct connection between a Leslie speaker and Hammond organ8-Pin Din Socket Allows direct connection between a Leslie speaker and Hammond models XK-1, XB-1, XM-2, and XM-1 using the optional special 8-pin cableLine In Jack Rotary: Input for the rotary speakers for organs and instruments without the multi-pin connector Stationary Left and Right: Inputs for stationary speakers. Signals received here will not be passed through the rotary systemStationary Input Select Stereo: Left and right inputs are output in stereo Mono: Left and right inputs are summed into monoLine Out Jack Stationary & Bass (Left/Mono, Right): Allows both the Stationary and the Low Rotary channels to be connected to an external amplifier Rotary (Left/Mono, Right): Allows the Low Rotary channel to be connected to an external amplifierRemote to Leslie 2121 Connects power control from the optional Leslie 2121 keyboard amplifier to the 2101 MKII for single-button power controlFoot Sw Preset: A latching foot switch is used to toggle between preset 1 and 2 Slow/Fast/Stop: Allows you to control the speed of the Leslie rotors. Each time the foot switch is activated, the rotors will switch between SLOW and FAST. If the foot switch is pressed and held for more than 1 second, the rotors will stop. One FS-9H foot switch is included and works with either input.MIDI In and Out MIDI In: Connects to the MIDI Out of an organ or keyboard organ, keyboard, or external device MIDI Out: Connects to the MIDI In of an additional Leslie model 21 Horn-Unit when two units are connected in series The MIDI In from the organ and the Foot Sw signal of the Horn-Unit are merged in the MIDI Out.Volume Controls Rotary: Adjusts volume of rotary channel Stationary L: Adjusts the volume control of the stationary left channel Stationary R: Adjusts the volume control of the stationary right channelTube Mode and Overdrive Overdrive: Adjusts the Overdrive level of the rotary channel Tube Mode: The soft overdrive offers a warm smooth sound, while progressing to the hard setting increases saturation with a "crunchier" soundExt. Speaker Neutrik NL4FX: Four-contact speaker output capable of driving a minimum of 4 ohms, such as the optional Leslie LPS-21 speakerPower Amp Overload Illuminates as the maximum output of the power amplifier is approached