TI242T

242T

Tiptop

Add an array of event-based triggers to your Eurorack modular setup with the TipTop Audio 242t Programmable Pulser, a flexible module for timing pulses, which provides locked, syncopated or alternating signal generation for a wide selection of time-based controls. Create up to three pre-programmed pulse rhythms (A, B, C) utilizing the easily programmed matrix section. There are start and stop CV inputs, two alternate pulse outputs (for generating ping-pong rhythms), and an all output, which sends a continuous pulse output. Additionally, there are manual stop, single pulse, and start buttons. The module ships with a ribbon power cable.Overview Inputs: These top two jacks can receive an external pulse to either start or stop the internal clock.The 242t can be externally clocked using the red clk in jack. External pulses can also reset the end stage using the red rst in jack.All Out: Sends out a continuous pulse train no matter what is programmed in the matrix. It is a direct output of the pulser.Matrix: Sends out individual pulse patterns as programmed in the matrix.Alter: These two jacks send out alternating pulses great for ping ponging.Gray Jack: Sends out a continuous ramp wave generated by the pulser, great to send to open a 292t.Pulses can be programmed using the 4 x 12 matrix.The n row selects the number of consecutive stages for rows A, B, and C. Rows A, B, and C can independently programmed using the two encoder knobs.The lower left knob scrolls through the vertical rows, the lower right knob scrolls through the horizontal rows. The on/off button activates or clears the chosen pulse point and a long press clears the matrix.The period section controls the rate/speed of the internal clock which drives the pulse matrix.Incoming CV to the left hand attenuverter knob can increase or decrease the rate selected by the right hand offset knob.The offset rate goes from audio rate speed (.002) to 10 seconds (or much longer) per stage.Eurorack Ready 16 HP Eurorack format moduleMaximum depth: 1.8" (45mm)Includes power ribbon cable with Eurorack power headersPower consumption: +12V: 130mA, -12V: 19mA