MA32050

32050

Magewell

The Magewell USB Capture SDI Plus is a one-channel 2K capture device that interfaces with your computer via USB 3.0. It features loop-through BNC input/output that allows you to see your video on a downstream device, while you are capturing it into your computer. It also has a line-in audio input, for capturing audio directly, without picture, or you can de-embed the audio from the SDI stream.Video Processing Video processing pipelines with 160MP processing bandwidthVideo croppingVideo scalingVideo de-interlacingWeaveBlend top & bottom fieldTop field onlyBottom field onlyVideo aspect-ratio conversionAuto or manual selection of input aspect ratioAuto or manual selection of capture aspect ratioThree aspect-ratio conversion modes: Ignore (Anamorphic), Cropping, or Padding (Letterbox or Pillarbox)Video color-format conversionAuto or manual selection of input color format & quantization rangeAuto or manual selection of capture color format, quantization range & saturation rangeSupport for RGB, YCbCr 601, YCbCr 709 color formatsSupport for Limited or Full quantization rangeSupport for Limited, Full & 'Extended gamut' saturation rangeVideo frame-rate conversionVertical flip and mirrorMultiple Devices on One Computer Support for connecting multiple USB devices to one system Support for setting the device serial number as the device name shown in the system using USB Capture UtilitySDK The USB Capture SDK provide functions including signal status extraction and capture configurationLED Indicator Status LEDs indicate the working state of each channel:Pulsing slowly: idleOn: input signal lockedOff: input signal unlockedDouble blinks: memory failed or FPGA configuration failed