LILLHIID

3657

Linhof

This Large Leveling Head II from Linhof is designed to allow a camera to be incrementally rotated on a horizontal axis for capturing a sequence of images that are intended to be aligned and merged into a single panoramic photo. It features a built-in Linhof panorama plate with a dovetail guide, which is a panning platform with an Arca-type clamp that provides the ability to rotate a camera 360 according to clearly visible hatch marks engraved at 5 intervals. Depending on which camera and lens is placed on this leveling head, as well as the lens's focal length, those interval hatch marks can be used to ensure that images within a sequence sufficiently overlap to form a panorama. Cameras or panoramic head components with 1/4"-20 or 3/8"-16 female accessory threads can be placed on the panorama plate with a dovetail guide using the included Linhof 003693 50mm Dovetail Track Plate, which is an Arca-type compatible quick release plate. The leveling head has a load capacity of 22 lb and is compatible with tripods or support systems that feature a 3/8"-16 mount. Loosening its control handle allows the leveling head's panorama plate to be rolled left or right, by up to 17 . Two corner-facing, adjacent bubble levels built into the dovetail guide help to ensure that this leveling head is properly angled to provide a camera with a horizontal rotation axis. This is particularly useful for cylindrical panoramas where their individual component images must remain uniformly level to avoid the appearance of slanting upwards or downwards after they are aligned. Cylindrical panoramas that initially appear to be slanted can require extensive cropping to obtain parallel top and bottom sides. This can result in a dramatic loss of picture area and apparent height, causing unexpected as well as unwanted changes to image composition and content. By incorporating this leveling head within a support system configured for the process of creating panoramas, misaligned horizontal orientations relative to a panoramic subject can be precisely compensated for, preventing slanted images and maximizing their potential area, helping to preserve creative intent.None Designed to allow a camera to be incrementally rotated on a horizontal axis for the purpose of capturing a sequence of images that are intended to be aligned and merged into a single panoramic photoPanorama plate with dovetail guide that is an Arca-type clamp provides the ability to rotate a camera 360 per visible hatch marks engraved at 5 intervalsCameras or panoramic head components with 1/4"-20 or 3/8"-16 female accessory threads can be placed on the panorama plate with dovetail guide using the included Linhof 003693 50mm Dovetail Track Plate, which is an Arca-type compatible quick release plateLarge locking knob with knurled surface allows a compatible Arca-type quick release plate to be easily secured or removed from the clampLocking ring between panorama plate and dovetail guide allows the panorama plate to be fastened in one position or to rotate 360 Interval hatch marks on panorama plate can be used to ensure that images as part of a sequence sufficiently overlap to form a panoramaProvides up to 17 of roll, left or rightEnsures that individual panorama component images obtained by incrementally rotating the camera remain uniformly level to avoid the appearance of slanting upwards or downwards after they are alignedPrevents need to extensively crop aligned panorama component images to obtain a final panoramic image with parallel top and bottom sidesMaximizes potential area of final panoramic image, helps to preserve creative intentCompatible with tripods or support systems that feature a 3/8"-16 mount22 lb load capacityControl handle can be loosened or tightened to enable tilt movementDurable, cast aluminum constructionInterchangeable 1/4"-20 and 3/8"-16 mounts for dovetail track plateHex key to remove or install interchangeable 1/4"-20 and 3/8"-16 mounts for dovetail track plateIntegrated hex