MA64010

64010

Magewell

Convert HDMI video to an NDI stream with the Pro Convert HDMI 4K Plus video signal converter from Magewell. Pro Convert 4K features one HDMI input and one HDMI loop-through output with eight channels of embedded audio, and it supports HDMI input up to DCI 4K 4096 x 2160 at 60 fps. The RJ45 Gigabit Ethernet port supports encoded NDI output up to 4096 x 2160 8-bit 4:2:2 at 60 fps. The HDMI loop-through allows you to view your input on a monitor while your NDI-encoded stream can be sent to a variety of NDI-compatible encoding or streaming applications such as OBS, XSplit, vMix, Wirecast, and others via Ethernet. The mini DIN-8 tally/PTZ port provides tally input to pass-through as well as for use with the unit's status LEDs. The LEDs also indicate power, output, and input signal status. The unit is powered by a 5V power adapter connected to its USB 2.0 Type-B port or via PoE (Power over Ethernet) over its RJ45 port. The Pro Convert can be managed with a web UI to configure settings and to perform firmware updates via the USB port. A 1/4"-20 mounting thread allows you to mount the unit in a rack, bracket, or on a stand. Included with the Pro Convert are a USB cable, a 5V power adapter, a mini DIN-8 cable, and an L-bracket for mounting.Key Features One HDMI input, one HDMI loop-through output with embedded audioConvert one HDMI signal with 8 channels of embedded audio to an NDI streamSupports up to 4K60 inputSupports up to 4096 x 2160 8-bit 4:2:2 at 60 fps NDI encoding outputUSB 2.0 Type-B 5V power and PoE via RJ45 portMini DIN-8 PTZ/Tally portSupport for NDI 3.xSupport for 8-channel IEC60958 audio streamsSupport for extraction of audio formation information and channel status dataSupport for extraction of video timing informationSupport for extraction of 3D format informationSupport for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode600 MHz HDMI receiverAdaptive HDMI equalizerSupport for customized EDIDSupport for extraction of AVI/audio InfoFramesVideo Processing Features Video brightness, contrast, saturation, hue adjustmentVideo deinterlacingTop field onlyBottom field onlyVideo aspect ratio conversionAuto or manual selection of output aspect ratioVideo color format conversionAuto or manual selection of input color format and quantization rangeAuto or manual selection of output color format, quantization range, and saturation rangeSupport for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formatsSupport for YUV BT.601, YUV BT.709, YUV BT.2020 output color formatsSupport for Limited or Full quantization rangeSupport for Limited, Full, and 'Extended gamut' saturation rangeVideo frame rate conversionVideo mirror flipNDI Source Name Support for setting the device name shown in the system using Web UI. By default, the device name is 'Pro Convert'Support for setting the source name shown in the system using Web UI. By default, the source name is 'board-index + serial number'Support for setting board-index, from 0 to F, through on-board rotary switchStatus LEDs The state of power supply: on/offTally: preview/programThe state of input signal: locked/unlockedThe state of loopthrough signal: loopthrough connected and signal detected/undetectedSupported Software The following software has been tested successfully with the Pro Convert HDMI: OBSXSplitvMixVidBlasterXWirecaststreamstar SWmimoLiveNewTek NDI-enabled encoding or streaming software Supported Web Browsers The following web browsers have been tested successfully with the Pro Convert Web UI: Microsoft Internet Explorer 11Microsoft EdgeMozilla Firefox version 61 and aboveGoogle Chrome version 49 and aboveApple Safari 11.1 and aboveOpera 55.0.2994.44 and above