MA64050

64050

Magewell

The Pro Convert HDMI TX 1-Channel NDI Encoder from Magewell allows you to convert an HDMI signal with embedded audio to an NDI stream. It supports resolutions up to 2048 x 1200 at 60p on both input and NDI output. The device can be powered via an included power adapter or over PoE using the NDI port. It features a 1/4"-20 thread for camera mounting and can be used in the studio or in the field thanks to a compact and robust design. There's also a PTZ+tally shared mini-DIN port for connecting tally lights or setting up NDI-based PTZ camera control. A tally light accessory comes included. A companion Web UI allows assigning the device name, source name, and other settings. The encoder also has an on-board SD card slot but it is not functional at the time of this writing. Any future firmware updates will also be accessible via the Web UI. The Pro Convert HDMI TX Encoder additionally features an adaptive HDMI equalizer that allows for HDMI cables lengths up to 98'.HDMI Specific Features 165 MHz HDMI receiverAdaptive HDMI equalizer support for cables lengths up to 98'Customized EDID supportExtraction of AVI/Audio InfoFramesFull colorimetry supportUp to 2048 x 1200 4:4:4/4:2:2 60 fps input signalsSupport for 8-input and 2-output IEC60958 audio streamsExtraction of audio formation information and channel status dataExtraction of video timing informationExtraction of 3D format informationSide-by-side half, top-and-bottom, and frame packing 3D modesNDI Output Format 4:2:2 8-bit output Up to 2048 x 1200 at 60 fps Support for NDI 3.x Supported Web Browsers Microsoft Internet Explorer 11Microsoft EdgeMozilla Firefox version 61 and aboveGoogle Chrome version 49 and aboveApple Safari 11.1 and aboveOpera 55.0.2994.44 and aboveSupported Software OBSXSplitvMixVidBlasterXWirecaststreamstar SWmimoLiveAny other NewTek NDI-enabled encoding or streaming softwareVideo Processing Features Video processing pipelines with 160 megapixels per secondVideo brightness, contrast, saturation, hue adjustmentVideo de-interlacing: top field only; bottom field onlyAuto or manual selection of output aspect ratioAuto or manual selection of input color format and quantization rangeAuto or manual selection of output color format, quantization range, and saturation rangeSupport for RGB, YUV BT.601, YUV BT.709, and YUV BT.2020 input color formatsSupport for YUV BT.601, YUV BT.709, and YUV BT.2020 output color formatsSupport for limited or full quantization rangeSupport for limited, full, and extended gamut saturation rangeVideo frame rate conversionVideo mirror flipNDI Source Name Set the device name and source name shown in the system using Web UISet board-index, from 0 to F, through an on-board rotary switch