ETD22LTMW

7411A1051-1

ETC

The white, Track Mount Desire D22 Studio Lustr+ Wash Fixture from ETC uses an exclusive x7 Color System array of twenty-two LED emitters to achieve accurate color rendering across a broad spectrum, with high intensity and variable color output. A 15-bit virtual dimming engine provides smooth, high-quality theatrical fades, minimizing color shift during dimming. The all-metal die cast body has built-in filter slots that allow you to change the D22's native 21-degree field angle from very narrow to extra wide. The fan-free, convection cooling design is especially valuable in noise-sensitive environments; and thanks to its multi-voltage power supply, the D22 is ready for worldwide use.D22 LED Array Optimized array with six colors plus high-intensity white LEDs to create an ideal wash fixture for full-range colorD22 Mounting Configuration Track Yoke: Track adapter and a single, permanent cableGeneral ETL-listed general purpose lightingUser-friendly control interface with multiple modes and fixture settingsPermanent power input cable connectedPhysical Rugged die cast all-metal housingEasy access slots for secondary lenses and 5.5" accessoriesAvailable in black (standard), white, silver (optional), or custom colorsIP40 ratingElectrical 100 to 240 VAC 50/60 Hz Universal power inputtwenty fixtures total per circuit when used with R20 Relay Module or Unison Echo Relay Panel (consult breaker trip curves when used with other equipment)Requires power from a non-dim sourceInrush @120V: 17A, @ 240V: 25ALED 50,000-Hour LED life (50,000 hours at 70% intensity)Twenty-two Luxeon Rebel LED emittersColor Exclusive x7 Color System seven-color LED arrayBeautifully illuminates skin tones and other objects for natural appearance and high color renderingBroad-spectrum color interacts seamlessly with conventional sourcesExclusive, optional red-shift function emulates tungsten dimming performanceOptical Primary field angle of 21 Secondary lenses available for multiple beam spread optionsControl User settings on D22 fixtures allow multiple operational modes and settings for either console operation via DMX protocol or stand-alone operation. The expanded LCD display provides easy navigation to all possible settings and options. Some of them are:Multiple DMX choices, ranging from a simple RGB profile (which effectively controls all seven LED colors via three channels) to nine-channel "direct" color and intensity controlMultiple dimming curve optionsPreset colors and sequences for stand-alone (no console required) operationWhite-Point Selection: White-light and color behavior based on a specific color-temperature white light (i.e. 3200K, 5600K, etc.)Loss of Data Behavior Options: Instant off, hold last look for two minutes, etc.Output Modes: Three output options that offer the user a choice between maximum output and maximum consistency Thermal Ambient operating temperature of 32 to 104 F(0 to 40 C)Active electronic thermal management for droop-free operationNoiseless, fan-free convection cooling for acoustically sensitive installationsFixture is designed for continuous operation up to 104 F (40 C) ambient temperature and requires free-flow of air around fixture housing