ETD22TTMB

7411A1061

ETC

The black, Track Mount Desire D22 Studio Tungsten Wash Fixture from ETC uses twenty-two 3000K LEDs for high-intensity, non-variable warm-white output. A 15-bit virtual dimming engine provides smooth, high-quality theatrical fades, minimizing color shift during dimming. The all-metal die cast body has built-in filter slots that allow you to change the D22's native 21-degree field angle from very narrow to extra wide. The fan-free, convection cooling design is especially valuable in noise-sensitive environments; and thanks to its multi-voltage power supply, the D22 is ready for worldwide use.General ETL-listed general purpose lightingUser-friendly control interface with multiple modes and fixture settingsPermanent power input cable connectedD22 Mounting Configuration Track adapter and a single, permanent cable for both power and DMX InPhysical Rugged die cast all-metal housingEasy access slots for secondary lenses and 5.5" accessoriesAvailable in black (standard), white, silver (optional), or custom colorsIP40 ratingElectrical 100 to 240 VAC 50/60 Hz Universal power inputTwenty fixtures total per circuit when used with R20 Relay Module or Unison Echo Relay Panel (consult breaker trip curves when used with other equipment)Requires power from a non-dim sourceInrush @120V: 17A, @ 240V: 25ALED 50,000-Hour LED life (50,000 hours at 70% intensity)Twenty-two Luxeon Rebel white-light LED emittersColor Contains twenty-two 3000K LEDs for high-intensity, non-variable warm-white outputOptical Primary field angle of 21 Secondary lenses available for multiple beam spread optionsControl Multiple control options, including strobe, and console-free Master/Slave mode15-Bit virtual dimming engine provides smooth, high-quality theatrical fades, and minimizes color shift during dimmingRDM functionality for address and setting changesThermal Ambient operating temperature of 32 to 104 F (0 to 40 C)Active electronic thermal management for droop-free operationNoiseless, fan-free convection cooling for acoustically sensitive installationsFixture is designed for continuous operation up to 104 F (40 C) ambient temperature and requires free-flow of air around fixture housing