LEDSQDBMK

Lectrosonics

Using state-of-the-art Digital Hybrid Wireless technology, this Lectrosonics DSQD 4-Channel Digital Wireless Receiver with Dante Kit from B&H adds four DBu digital bodypack transmitters to meet the needs of audio professionals in broadcasting or on film and TV sets.Backward Compatibility The DSQD is backward compatible with any Digital Hybrid Wireless transmitters including the SM Series, LT, HM Series, SSM, HH Series, UM400, UM400a, LM Series, MM Series, and WM. It can also pick up channels from an M2T duet transmitter or a DCHT portable stereo transmitter.System Performance 1.4 ms latency, transmitter input to analog output, using a digital transmitterTHD+N of 0.05% at 1 kHz, -10 dBFS108 dB of dynamic rangeThree Levels of Diversity Reception Switched: The receiver selects the antenna with the best signal. In this mode, there are four receivers available.Ratio: Two receiver channels can be paired as one receiver. Both channels are set on the same frequency. One receiver in the pair is fixed on Antenna A, while the other receiver is fixed on Antenna B. The DSQD automatically uses whichever receiver s RF signal quality is better.Frequency: Two receiver channels are paired as one receiver. Each channel is set to a different frequency. The DSQD automatically uses whichever receiver s RF signal quality is better.Three Levels of Encryption Standard: This is the highest level of security. The receiver tracks the number of keys generated and the number of times each key is transferred. Once a Standard key has been transferred 256 times, the software alerts you that a new key must be created.Shared: There are an unlimited number of shared keys available. Once generated by the DSQD and transferred to the transmitter, the encryption key is available to be shared (synced) by the transmitter with other transmitters/receivers via the IR port.Universal: This is the most convenient encryption option available. All encryption-capable Lectrosonics transmitters and receivers contain the Universal Key. The key does not have to be generated by the DSQD. Simply set a Lectrosonics encryption-capable transmitter and the DSQD to Universal, and the encryption is in place.Infrared Sync The DSQD has a bidirectional IrDA interface that allows quick syncing of settings and encryption keys to transmitters with the push of a button.Large Color LCD Display On the home screen, the high-resolution color display shows activity for all four channels including operating frequencies, RF levels with 10 seconds of history, audio levels, transmitters' battery levels, and mute status.Networked Audio Dante support allows you to seamlessly send uncompressed, multichannel audio over standard IP Ethernet networks with low-latency, sample-accurate synchronization, and automatic device discovery.Wireless Designer Software Wireless Designer software integrates the digital and Digital Hybrid Wireless into a single control panel with site scanning and frequency coordination. The software can be used while connected to the DSQD or offline in planning a large multichannel system.Other Features Digital talkback capability when used with talkback-enabled transmittersStereo headphone jack with retractable headphone volume knob for audio monitoring per channelAntenna bias power can be engaged in the menu, and front-panel LEDs show the statusSerial input and output ports for connecting receivers to each other for data sharingAdding a pair of ALP690 active antennas increases the range of your system and offers increased protection against interference