BAAT212MK3

AT212-MK3

BASSBOSS

Designed for easy setup and high output applications, the BASSBOSS AT212-MK3 is a high-performance loudspeaker that's simple to use, easy to set up, and capable of smooth sound reproduction with a natural, musical character.The AT212-MK3 features a 3200W Class-D amplifier that delivers 2400W to the two 12" woofers and 800W to the 3" compression driver, which combine for a 50 Hz to 18 kHz frequency response and a maximum 142 dB SPL, plenty of volume for a mid-sized event. Intended for use with a subwoofer system to complete a 3-way active full-range system, the AT212-MK3 has a tall, slim design that allows the HF horn to stand above crowds when the cabinet is stacked on subwoofers. The light weight of the cabinet makes stacking by one person possible. A Neutrik powerCON True 1 power cable is included.What's New MK3 Amp UpdateThere are all-new amplifiers in the MK3 series. Total power has increased, however power allocated to woofers increased substantially. The higher output voltages provide more impact. Universal input voltage compatibility of 90-250V provides more flexibility. Waterproof connections provide more peace of mind.MK3 Enhanced DSPThe MK3 features an all-new 96 kHz DSP. The pushbutton presets have doubled, from 4 to 8, and up to 100 presets can now be stored in the DSP and loaded via LAN. The comprehensive suite of processing includes meticulously tuned equalization, all necessary high-pass and low-pass filters as well as multiple protection systems and limiters to prevent driver overload in as many ways as possible.ControlBASS SoftwareControlBASS software supports an essentially unlimited number of possible BASSBOSS-developed or customized user presets which integrate seamlessly and coherently with all other BASSBOSS products for effortlessly perfect setups. The latest in DSP programming developments can be added via easy remote updating.Advanced Speaker Design The AT212-MK3 is a vented cabinet that features two high-efficiency 12 woofers. The woofers feature 3.5 voice coils, Neodymium magnets, cast aluminum baskets and ultralight cones. The compression driver also features a Neodymium motor structure with a 3 voice coil. It is mated to a 1.4 throat, cast aluminum horn. The horn is rotatable, providing 80 x 60 degree coverage for multiple applications including ground stack and horizontal or vertical flying.Plug-and-Play The AT212-MK3 is the ultimate in plug-and-play, with universal voltage compatibility and no need for any outboard gear, other than a sound source. The built-in processing features presets that allow it to run in multiple configurations. Each preset offers advantages that suit specific applications and preferences.Remarkable Constuction Power is supplied by an amplifier that can deliver output peaks of 163V, to provide amazing dynamic resolution and impact. The fully integrated and comprehensive digital processing ensures smooth response and reliable operation thanks to meticulous filter alignments and five-stage limiters that protect the drivers from excessive excursion, thermal overload and clipping. The amplifier features a large heat sink and 2 temperature-controlled fans to ensure consistent operation, even under the most extreme conditions.The cones are waterproofed to protect them from accidental exposure to moisture such as rain or spilled beverages. Weather-resistant, IP65-rated power connectors, an internally sealed input section and waterproof-treated cones are provided to allow operation where rain might be encountered.The cabinet is built from 18 and 15mm Birch plywood. It features an 18mm baffle and 18mm top and bottom, with 15mm sides, port walls and braces, all assembled with dado joinery. The cabinet includes 4 steel bar-handles, 4 internally braced steel M10 fly points and a 35mm (1-3/8 ) cast metal pole socket. Although the AT212 cabinet is equipped with a 35mm steel pole socket, DO NOT use this speaker on a tripod or extension pole. This socket is to be used with a special,