BAAT312MK3

AT312-MK3

BASSBOSS

Add high-fidelity sound to your next small to mid-sized event with the BASSBOSS AT312-MK3, a high-output, point-source loudspeaker that's simple to use, easy to set up, and capable of very high output with superbly uncolored sound and natural musical character.The AT312-MK3 features a 4000W Class-D amplifier that delivers 2400W to the two 12" woofers, 800W to the 12" mid-frequency driver, and 800W to the 3" compression driver, which combine for a 60 Hz to 19 kHz frequency response and a maximum 139 dB SPL, plenty of volume for a small to mid-sized event. The coaxial configuration places the compression driver within the center of the mid-range woofer which ensures phase accuracy for clear, intelligible sound at any level. A Neutrik powerCON True 1 power cable is included.What's New MK3 Amp UpdateThere are all-new amplifiers in the MK3 series. Total power has increased, however power allocated to woofers increased substantially. The higher output voltages provide more impact. Universal input voltage compatibility of 90-250V provides more flexibility. Waterproof connections provide more peace of mind.MK3 Enhanced DSPThe MK3 features an all-new 96 kHz DSP. The pushbutton presets have doubled, from 4 to 8, and up to 100 presets can now be stored in the DSP and loaded via LAN. The comprehensive suite of processing includes meticulously tuned equalization, all necessary high-pass and low-pass filters as well as multiple protection systems and limiters to prevent driver overload in as many ways as possible.ControlBASS SoftwareControlBASS software supports an essentially unlimited number of possible BASSBOSS-developed or customized user presets which integrate seamlessly and coherently with all other BASSBOSS products for effortlessly perfect setups. The latest in DSP programming developments can be added via easy remote updating.Advanced Speaker Design The AT312-MK3 driver complement incorporates dual 12 woofers in a vented enclosure for low frequencies, a 12 driver in a sealed enclosure providing midrange, and, at the center of the midrange cone, a co-axially mounted 1.4 exit compression driver provides the high frequencies. Coverage is 80 degrees conical.Dual 12 low frequency drivers were chosen to minimize cabinet frontal area while delivering the best possible acceleration and impact in their operating range. Thanks to the narrow frontal area, the AT312-MK3 can provide tremendous output and fidelity while remaining relatively unobtrusive.The 12 co-axial mid-high section allows the loudspeaker to function as a point-source, with the two additional low-frequency drivers remaining within wavelength in their operating band. This arrangement delivers more consistent off-axis performance than conventional loudspeakers. The consistency of coverage and the uniformity of the response throughout the coverage area make the AT312-MK3 highly resistant to feedback. The coverage consistency also enhances the loudspeaker s versatility, allowing it to be mounted horizontally or vertically with no compromise in coverage or performance.Although the AT312 cabinet is equipped with a 35mm steel pole socket, DO NOT use this speaker on a tripod or extension pole. This socket is to be used with a special, short section of pole to prevent it from moving once stacked on a subwoofer.Power Capabilities The AT312-MK3 features 4000W of amplification. With 2400W of its power available for thewoofers, 800W available to the midrange, and 800W available to the tweeter, power is plentiful. The amp's high peak-output voltage provides for very intense, high SPL hits.Comprehensive Digital Signal Processing On-board presets provide a variety of high-pass filters to suit full-range operation through a variety of settings that maximize SPL when used with a subwoofer. The sealed enclosure provides the flexibility to choose between low-frequency extension or high-SPL operation from the same compact loudspeaker.The proprietary BASSBOSS processing ensures exceptional sound q