APBN1500M2

BN1500M2

APC

Safely shut down computer systems and guard connected equipment from surges with the Back-UPS PRO BN1500M2 Battery Backup & Surge Protector from APC. The UPS is armed with a total of ten NEMA 5-15R outlets, with six providing surge and backup power and four designed for surge protection only. In the event of a power outage, the UPS comes equipped with an internal battery that delivers up to 900W of power. The battery-powered outlets provide up to 3.1 minutes of use at full load and and up to 11.4 minutes at half load. For electrical spikes, the UPS has a 1080J surge energy rating. Other notable connections include coax and Ethernet ports for safeguarding video and network signals. There is also a USB-A and a USB-C port with a total of 15W of power available. Included along with the backup UPS is a USB cable, a coaxial cable, a USB power adapter, and a downloadable PowerChute software program to monitor energy usage and prevent data corruption by automatically saving files and shutting down a computer system. General FeaturesManageability Warns when a battery is not available to provide backup power.Use your PC to access additional power protection and management features for your UPS via a USB Port.Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.Provides notification of changing utility power and UPS power conditions.Safety Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Availability Maximizes battery performance, life, and reliability through intelligent, precision charging.Toggle between predetermined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.Provides early-warning fault analysis on batteries enabling timely preventive maintenance.Provides temporary battery power when the utility power is out.Periodic battery self-test ensures early detection of a battery that needs to be replaced.Protect equipment with input transformer blocks without blocking access to other receptacles.Gives higher application availability by correcting low- and high-voltage conditions without using the battery (not available on all models).Energy saving feature automatically powers off peripherals when the master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Serviceability Increases UPS availability by allowing quick, easy battery replacement.Easy recovery from overloads; no need to replace a fuse.Protection Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.Provides protection of connected equipment from power surges on the data lines.Back up and protect your hardware and data during power outages, surges and spikes.Additional Features Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Energy saving feature automatically powers off peripherals when the master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.Reserves power capacity and run time for connected equipment that require UPS battery backup while providing surge only protection for less critical equipment.Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.Preserves batter