EMBUFF

BUFF

Empress Effects

Improve the signal integrity and efficiency of your pedalboard with Buffer from Empress Effects, an all-analog I/O interface pedal that helps eliminate signal loss from long cable runs or unbuffered bypassing. Loaded with useful functions like an input pad and a series FX loop, Buffer helps you maintain a perfect tone.A dedicated tuner output is provided, useful for a range of functions beyond keeping your tuner out of your signal chain. With the input loading adjustment, you can set your input impedance from 10 kilohms to 1 megohm depending on your pickup configuration. Constructed from die-cast aluminum, this rugged pedal can survive years of touring while maintaining a compact form factor that keeps your precious pedalboard real estate available.Input Pad With a three-way switch, you can pad or boost your input by 3 dB. This feature is great for matching outputs of different guitars, reducing overly hot active pickup signals, or boosting the signal going to your FX for an improved signal-to-noise ratio.Tuner Output The separate tuner output is not only useful for keeping your tuner out of your FX signal chain, it can also be used as a secondary output for numerous applications. Use this second jack for stereo output, DI recording, or as a key signal for a noise gate or side-chain compressor.Input Loading The main goal of a buffer is to prevent signal loss, but some high-frequency roll-off from a long cable run may sound pleasing. When this side-mounted knob is fully clockwise, the full frequency range of your guitar signal passes through.Turn the knob counterclockwise to start loading down your guitar, changing the response of your pickups, and rolling off just the right amount of high frequencies.Alternative Uses The Buffer can also act as 1-in / 3-out splitter. The input signal is normally routed to the loop out and tuner out.When nothing is connected to the loop in jack, the input signal will also be routed to the amp out jack. This could be used to run multiple amps, or to record a separate dry signal when tracking, to use for reamping.