TVC22755

C2-2755

TV One

The C2-2755 Universal Scaler PLUS from TV One allows you to convert just about any type of video signal to just about any other signal with less than two frames of latency. It can support resolutions up to 1920 x 1200 at 60 Hz and will accept as well as output composite, component, VGA, DVI, and HDMI, plus can input only via SDI. Additionally, analog audio inputs and outputs allow stereo audio to be embedded or de-embedded from digital video signals. On top of scaling and frame rate conversion, the C2-2755 can also act as a 3 x 3 matrix switcher allowing you to route any of the inputs to any of the outputs.Flexible Inputs and Outputs The C2-2755 features inputs and outputs to cover just about any scenario: Inputs: SDI with 3G-SDI, HD-SDI, and SD-SDI support, HDMI, VGA , composite, DVI-U, a stereo 3.5mm mini jack audio input, and three analog audio inputs on terminal connectors Outputs: HDMI, composite, DVI-U, and one analog audio on a terminal connector DVI-U: DVI-U is a combo connector that will pass HDMI, DVI, VGA, component, or composite video signals as well as embedded audio where applicable. An adapter will be required to connect any devices that do not use DVI connectors Auto-Switching The Auto-Switching function allows the user to connect video source and have its image automatically displayed on screen without having to press any buttons. The incoming resolution is quickly detected and analyzed, meaning within a few seconds the user is up and running and ready to present. This is particularly useful in situations where there is little or no technical supervision, such as in meeting rooms, medical environments, teaching spaces, or live staging events Note: Please ensure you are updated to the latest firmware to enable this featureRemote Control Options In addition the built-in OLED screen and OSD menu system provided for local operation, RS-232 and IP control are supported by C2-2755. RS-232 allows third-party wired remotes and control systems to be used; while IP control allows the device to be operate from a computer connected to the same network. Control and configuration software for Windows is includedAdvanced Features Keying: allows one input to be keyed over a second input. The keyed image may be faded in and out. Precise keying at the pixel level is possible due to 4:4:4 sampling format when using RGB video sources Transitions: permits Seamless Cut, Fade, or Wipe transitions when switching between input sources Picture-in-Picture (PIP): allows an input to be inset in a window over a second input or vice versa; the PIP window may be placed anywhere on the screen Genlock: synchronizes video sources internally to ensure seamless switching Audio Features Switching: an internal routing switcher allows any one of the four analog audio inputs to be routed to the analog audio output regardless of impedance. Each audio input is assigned to a video input, allowing audio to follow video when switching Embedding and de-embedding: embedded audio support allows any audio input to be embedded on all outputs, which support embedded audio data (HDMI, DVI-U, and SDI)Image Processing Features Size and Position: automatic via Calibrate or manual Image Size: user-definable presets Image Freeze: one video frame Settings Memory: non-Volatile Zoom Range: variable to 10x Zoom Shrink Range: variable to 10% Image Mirroring: horizontal and/or vertical Horizontal Filtering: full digital Conversion Technology: CORIO2 Framerate Conversion: temporal Color Resolution: 24-bit (16.8 million colors) Sampling Rate: 162 MHz Digital Sampling: 24-bit, 4:4:4 or 4:2:2 format, depending on input source Firmware Memory: flash upgradeable via RS-232 or IP Video Encoder and Decoder: 8-bit digital De-Interlacing (NTSC/PAL): pixel-level motion adaptive, diagonal interpolation Film Mode (NTSC): 3:2 pulldown Maximum Latency: 1 to 2 frames Video Adjustments CV/YC: Contrast, Brightness, Saturation, Hue (NTSC), Analog RGB/YPbPr levels