SCCCM2SLG

CCM 2S LG

Schoeps

The SCHOEPS CCM 2S Omni-Directional Compact Microphone with LEMO Disconnect has an omni-directional pattern. It is a miniature true classic condenser microphone (no electret used). The capsule and amplifier form an inseparable unit in a single housing. The microphone includes a K5 LU 16 Detachable LEMO to XLR-3M Adapter Cable with 3mm diameter, SGC Stand, and wood box. It has a slight high frequency emphasis for universal use. It is used for essentially suitable pickup of low-frequency information and room sound. If directivity is not required (e.g., close miking), the omni CCM 2S + windscreen W 5 or W 5 D will offer low sensitivity to wind, popping, and handling noise for outdoor recording. It is an all-purpose capsule for music and speech and also for use at moderate distance (at or near the reverberation radius). The MK 2S Microphone Capsule exhibits a slight high-frequency emphasis for frontal sound incidence, with only a slight roll-off of high frequencies off-axis and in the reverberant sound field. The frequency response characteristic of the CCM 2S falls between that of the CCM 2 and the CCM 3 Micrphone, making this microphone suitable for a wide range of applications. The CCM 2S is particularly useful in 2- and 3-microphone stereo arrays, where its placement near the reverberation radius of the sound field presents a sonically balanced pickup favored by many recording engineers. It has become a popular pressure transducer. The included K 5 LU Cable is an adapter cable from the LEMO output connector of the CCM _L Compact Condenser Microphones to XLR-3M. The included Miniature Stand Mount with Swivel SGC is adjustable from 0 through 100 in either direction. The internal thread of the SGC screws onto any 3/8 rod (e.g., vertical support rods STR) or stand adapter. The SGC is an integral part of the HC miniature cable hanger and the TCg table stand.None True condensers do not require electronic frequency response correctionNone Balanced, low-impedance output via removable 16.4' (5m) cable; LEMO to XLR-3M connectorNone For universal useNone Small and lightNone LEMO disconnect allows for use of special accessoriesNone Boasts flat frequency responseNone Sound is extensively independent of directional patternNone Has low noise and distortionNone Runs on both 48 and 12V phantomNone Can be used with very long cables over 328' (100m)None Matte gray non-reflective surface finishNone Omni-directional patternNone Slight high-frequency rise to compensate for losses at moderate recording distancesNone For a very wide range of recording applicationsNone Often preferred for spaced microphone stereo pickup and Decca Tree arrangementsNone Applications: Orchestra in stereo and surroundNone Can be used for use with general instrument including organs