BOCORE4X12

CORE4X12

Bogen

Designed for small to medium installations, The CORE 4X12 from Bogen Communications is a versatile drag-and-drop DSP processor. The processor consists of a configurable hardware main frame, along with dedicated DSP software. The hardware system configuration is highly flexible, with front panel knobs that can be programmed to map to any functions within the DSP library and can be scaled to match the requirements of the project. The software system design is PC based and once connected, allows for design, downloading, reversal of in-box designs, and live monitoring, calibration, and routing. Third-party control systems such as Crestron, AMX, Vity and others can also control unit either via RS-232 or IP commands. Up to fifty-three minutes of audio storage is available and audio files can be activated via a built-in scheduler, any of sixteen TTL inputs, or via an end user GUI interface custom built for each application. Up to twelve CORE units can be networked together for expandability. A variety of accessories, including low cost analog controllers (RAC), digital controllers (URC), and various paging and control microphones (PPM, PPM Touch) are available for use with the system. FeaturesNone Four analog inputs and twelve analog outputsNone Configuration via PC/LaptopNone Programmable, scalable front panel knobs for DSP functionsNone Third-party control via RS-232 or IP commandsNone Full DSP drag-and-drop component libraryNone Up to fifty-three minute built-in message storageNone Sixteen built-in TTL inputs and eight logic outputsNone Stack up to twelve unitsHardware Components Main Frame 4 x Slots for input/output cards 16 x TTL/analog inputs 8 x TTL outputs 1 x RS485 1 x RS232 port 1 x Ethernet port Each Input Card 4 x Channels with individual bypass Mute Sensitivity select Phantom power RTO (Route To Output) VU meter Signal present Level control Adjustable overload threshold Each Output Card 4 x Channels with individual overload indicator Mute Meter Signal present Level control Adjustable overload thresholdSoftware Components Delays 5 to 2000 ms Dynamics AGC (mono and stereo) Automatic noise sensing Compressor Comp-limiter Expander (mono and stereo) Ducker (mono and stereo) Mono and stereo gate Voice Gate, Gate with sidechain Equalizers Mono and Stereo GEQ (1 octave, 2/3 octave, 1/3 octave) Mono and stereo PEQ (2, 4, 6, 8, 10, 16 bands) Feedback Cancellation Dynamic Feedback cancellation 1/5, 1/10, 1/20, and 1/100 octave with 4, 8, 12, or 16 bands Inverter Level Controls 4 x 4, 8 x 8, 16 x 16 Local Echo Suppression Module Meters 1, 4, 8, 16 channel peak/RMS Logic And, Not, Or, Nor gates with Net input/output for network applications Message Repeater Up to 53 minutes of audio can be stored inside the box and output two separate messages simultaneously to independent zones - messages can be activated using TTL inputs or via the built-in scheduler Mixers Automixers Automixers with mix minus Matrix mixers Standard mixers Room combiner Noise Generator White Pink Tone Page Control Module For zone paging applications Selectors 4x1, 5x1, 6x1, 7x1, 8x1, 16x1, 32x1 for use with third-party control or ATEIS RAC, URC remote controllers Custom Components Build a custom program and password protect it