DJI2ML

CP.IN.00000001.02

DJI

More easily perform complex multi-operator shots and maneuvers with the Multilink from DJI. Designed specifically for Inspire 2 and Cendence remote controllers, the Multilink allows for multiple remotes to control different aspects of a drone, as well as share incoming video signals. Multilink allows for one master remote and up to three slave remotes. The slave remotes send commands to the aircraft via the master remote, and the drone's image/video signal is received by the slave remotes directly from the aircraft. Once set up, the master remote is designated as the pilot and the first slave remote is the gimbal operator. The pilot can control the gimbal as well, but not simultaneously. The second and third operators cannot control the gimbal but can control the camera itself, as can all remote operators. It's designed to connect to your Inspire 2 or Cendence controller, or an optional patch antenna module, directly via the included CAN cable. Simply use the DJI GO 4 app to complete setup and assign each remote's role.