CRCSLNX4

CS-LNX-4

Creamsource

This LNX Mount 4-Way from Creamsource is used to mount LNX Vortex lighting units to a grid. Each LNX mount has a latching pipe clamp that works with 1.5" speed rails to secure your LNX mount to the grid or pipe, remember to use an optional safety tether when flying any piece of equipment overhead. The mount also accepts up to four LNX pins, which enables you to build an array of Vortex lighting units. You will need to insert the optional LNX pins into the back of each Vortex fixture and then press the LNX mount onto the pins until you hear an audible click. Press the pin release mechanism to remove the pins from the LNX mount.Once mounted, move the master lock slide so that the window displays green, indicating the safety is engaged. If orange is displayed in the master lock window, this indicates that the lock is not engaged or that the pins are not properly secured to the LNX mount.Mounting Each optional Vortex lighting fixture requires four LNX mounts, with each mount positioned at the corner of the fixture.The design of the LNX mount allows it to support up to four fixtures at the same time, thus allowing you to build an array of available Vortex fixtures.