APDP1X2II

DP-1X2-II

Apantac

Send one video source to two DisplayPort displays with this MT HOOD DP-1X2-II DisplayPort 1x2 II Distribution Amplifier/Splitter from Apantac. The splitter supports DisplayPort 1.2a and HDCP 1.3 and can input up to 4K60 video at 21 Gb/s. The DP-1X2-II features a DIP switch with SST and MST modes. When set to SST mode, the same image is sent to both displays, and when set to MST mode, one image is split evenly across both displays.None Split one DisplayPort input to two DisplayPort outputs up to 16.4 feet awayNone Input up to 4K60 resolution with a maximum data rate of 21.6 Gb/sNone Supports DisplayPort 1.2a, HDCP 1.3, and HBR2/HBR/RBR (high bit rate)None Dual-mode outputs allow DisplayPort to be configured as HDMI outputNone Splitter supports SST and MST modes via DIP switches; SST sends the same image to two separate displays, while MST splits the image evenly across both output displaysNone The EDID is not stored on the splitter and passes through from the display to the source. The EDID of the first display plugged in will be used until the splitter is power cycled