RDDRN2ML

D-RN2ML

RDL

Designed as a complete wall-mounted Dante or AES67 audio network interface, the RDL D-RN2ML features one XLR mic or line input on the front panel, one stereo 3.5mm line-level input summed to mono on the front panel, and two balanced line outputs on a rear-panel detachable wiring block.Configure and adjust the module using RDL CONSOLE or other network control software. The D-RN2ML is powered by PoE and fits a standard US single-gang electrical box.Benefits Single-gang Dante or AES67 network interface for two audio inputs and two audio outputsOne balanced XLR mic-level or line-level inputOne line-level summed-to-mono mini-jack inputTwo balanced rear-panel outputs on detachable wiring blockSoftware-selected XLR input gain; Mic: 35, 42, or 59 dB; Line: unity or 12 dBP48 mic phantom selected by softwareAdditional Details Software-selected mini-jack input gain: unity, 5 dBOutputs equipped with software-controlled attenuator in 1 dB stepsModule is configured and adjusted using RDL console or other network control softwareCompatible with RDL network remote controlsHigh-resolution 24-bit analog to digital and digital to analog conversionLegendary RDL studio quality, low-noise performanceMic/Line to Network Section The XLR input is converted to a Dante network transmit channel. Five gain settings are software-selectable for the XLR input. Three gain settings are provided to match condenser or dynamic microphones. Two gain settings are provided to match standard line levels. P48 phantom voltage may be software enabled when the XLR input is set for mic level.Line Inputs to Network Section The mini-jack input is converted to one Dante network transmit channel. The left and right mini-jack inputs are actively summed. Three software-controlled gain settings are provided to increase or decrease the gain by 5 dB from the normal gain setting, optimized for an input level of -10 dBV.Network to Line Outputs Section Two Dante audio channels are converted to balanced line level, feeding a rear-panel detachable wiring block. Each output provides balanced +4 dBu for a network digital audio level of -18 dBFS. Each output is equipped with a software-controlled attenuator adjustable in 1 dB steps to a maximum attenuation of 63 dB, then OFF. The outputs may drive local power amplifiers or may feed additional XLR jacks mounted adjacent to the D-RN2ML in a dual-gang box. Two XLR mic or line outputs may be provided using an RDL D-D2 equipped with two AMS-XLRMA jacks, available separately.Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.The D-RN2ML is a professional-grade product with an RDL mic preamplifier for studio-quality fidelity and low-noise performance, with audio coupled through XLR and mini-jacks housed in a steel chassis with a powder coated or stainless-steel Decora front plate.The D-RN2ML s superior performance specifications make it ideally suited to installations requiring network control and exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A. for continuous duty in demanding installations. Designed to outperform. Built to last.