LOF60DCT

F60

Logan Graphic Products

The F60 Dust Cover Trimmer from Logan Graphics is used by professional framers, photographers, and artists to cut excess Kraft paper off the back of a frame. The Kraft paper, or "Dust Cover," is applied to the back of the frame to keep the dust out and the paper will usually overflow over the sides of the frame. Two pins located on the side of the trimmer will determine the blade placement for right- or left-handed use. To use, start at the edge of a corner, hold on a slight upward angle, and run the trimmer along the edge to trim. As you are trimming the paper off, it will cut an edge of 3/16" from the outside edge of the frame. Once the trimmer is no longer in use, the safety cover slides over to guard the blade.