FLECN2HPK8R

FF38080C

Flic Film

This ECN-2 Processing Kit from Flic Film provides the necessary chemistry components to process 8 rolls of film.Mixing Chemicals Use distilled water for all mixing. If preparing to process 2 rolls of 35mm in a Paterson tank, make 580mL of solution. For all other uses, use 500mL.PREBATH: Mix package into 400mL of water heated to 100 F . Stir until dissolved, then fill to make 0.5 liter.DEVELOPER: Mix package into 400mL of water heated to 113 F. Stir until dissolved, then fill to make 0.5 liter.STOP BATH: Add water to make 0.5 literBLEACH: Mix package into 400mL of water heated to 100 F. Stir until dissolved, then fill to make 0.5 liter.FIXER: Add room temperature water to fixer to make 0.5 liter.STABILIZER: Add to 0.5 liter of room temperature water.DEVELOPING: Warm prebath to 80 F. Warm Developer, Stop Bath, Bleach and Fixer to 106 F. Each chemical can be reused until the capacity of 8 rolls is reached.PREBATH: Fill inversion tank (Paterson, AP) to capacity, tap sides to release bubbles and soak 10 seconds, return prebath to container. Rinse three times, shaking vigorously each time. If using a Jobotype processor, fill tank to inversion capacity and follow same instructions.DEVELOPER: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 3 minutes have elapsed. (3 minutes 40 seconds for 580ml)STOP BATH: Add stop bath, invert once, and let stand for 30 seconds.RINSE: Exchange water three times.BLEACH: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 3 minutes have elapsed. (3 minutes 40 seconds for 580ml)RINSE: Exchange water three times.FIXER: Fill tank, invert continuously for 10 seconds, then four inversions every 30 seconds until 2 minutes have elapsed. (2 minutes 30 seconds for 580mL)RINSE: Exchange water for 5 minutes. Take film off reel and wipe with a wet cloth to remove any remaining Remjet.STABILIZER: Soak in stabilizer for 1 minute at room temperatureHang film to dry in a dust free locationStopper all bottles and store at room temperature.Equipment Required TimerThermometerProcessing tank or processor6-500mL chemical containersGraduate cylinderMicrofiber clothWater bathGlovesMaskEye protection