IKIBK23150V3

IBK23150-V3

ikan

Ikan's Small Interview Dual Color Kit is a good choice for the videographer who needs studio-quality lighting on the road. The kit includes two iLED 312-v2 bi-color light fixtures and one IB508-v2 bi-color fixture. Each light comes with two Sony L-type batteries, a dual charger, AC power supply, stand adapter, and a light stand. A padded carry bag is also included in the kit.The 16 x 9 x 0.8" IB508-v2 has a variable color balance from tungsten (3200K) to daylight (5600K), and 10-100% dimming, removing the need for repositioning the light or adding filtration. The light is powered by a multi-voltage AC adapter for worldwide use, or by two Sony L-type batteries. Its reflective four-way barndoors allow you to contour the light output, and fold flat across the panel to form a protective shell.The iLED312-v2 also has variable color and dimming, but its smaller 8.25 x 1.75 x 4.5" form factor allows it to be used on or off-camera. It has removable four-way barndoors, and runs on either Sony L-type batteries or its own AC power supply.Variable Color Temperature & Dimming The iLED312-v2 features 312 LEDs, and a single knob that allows you to vary the color temperature of the unit from 3200 to 5600K. A separate knob controls the dimming of the unit, with brightness range of 100 to 10%.Digital Display Screen The dimmer and color temperature settings are controlled by analog knobs, but the built-in digital readout on the built-in display screen allows you to match the output of other units or repeat setups, if you have to go back and get pick up shots. The display also incorporates a four-step battery gauge so you know how much battery power you have left.Barn Doors The included four sided removable barn doors are constructed so the doors can interlock together, limiting light leak from the edges, controlling light spill, and providing directionality to your light. The side doors feature articulating leafs that provide you a fairly wide range of adjustment while still controlling light leaks from the edges of the doors.Diffusion Although you can attach diffusion gel to the barn doors, the iLED312-v2 features a slot for the included precut diffusion sheet, that can be used with or without the barn doors in place. The diffusion is notched, and a safety tab engages the notch to prevent it from accidentally falling out.Power The light unit features slots for two L-Series type batteries of any capacity, and includes two NP550-type batteries. The light can run on one or two batteries, you can use the AC adapter that powers the included dual battery charger to power the light instead, via the small power connector on the back of the unit.Mounting The light incorporates a 1/4"-20 threaded mounting hole in the bottom of the unit, and an interlocking rail system that allows you to stack up to three units vertically or horizontally, with a maximum of six lights.