AJIPR10G2SDI

IPR-10G2-SDI

AJA

Decoding an HD SMPTE ST 2110 IP signal, the SMPTE ST 2110 IP to SDI Mini-Converter from AJA enables you to monitor and output SMPTE ST 2110 video (RTP) and audio (AES67) over 10 GigE network connectivity. Featuring two 10 GigE SFP+ cages that support optional SFP+ modules of your choice, the converter allows you to connect an IP signal, which it decodes and formats for source monitoring and dual 3G-SDI output. Audio is output embedded as well as over L/R analog RCA jacks. The two SFP+ cages allow "hitless switching" so there's no loss of frame synchronization in critical applications. The converter has a compact, rugged, and fanless design suitable for use in studio and in the field.Key Features SMPTE ST 2110 audio and video receiver2 x 3G-SDI outputs with mirrored source videoSupports up to 1080p60, 10-bit, YCbCr 4:2:2 uncompressedRugged, fanless design2 x 10 GigE SFP+ cages with status lights for media LAN, allowing hitless switching (SFPs not included)1 x 1 GigE RJ-45 port (with a status light) for control LAN IEC 60603-7 for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)Full 10-bit pixel processing pipelineEmbedded SDI audio output (up to 8 channels)L/R RCA analog audio output1 x mini-USB 2.0 port (IEC 62680-1) for initial network configuration with AJA eMini-Setup softwareComplete control interface accessible on any Web browser from a built-in Web serverCustomizable control with AJA REST APIHTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)Video Input IP Single-channel video input SMPTE ST 2022-7 dual-stream input for hitless switching Rx support for narrow/wide, gapped/linear modes Audio Input IP Up to 16 channels of audio, 24-bit per channel, 48 kHz synchronous (streams with up to 16-channels are received but only the first 8 are output) 1 ms or 125 s packet interval SMPTE ST 2022-7 dual-stream input for hitless switching Video/Audio Output 2 x 3G-SDI on BNC (single source, mirrored output) Up to 8 channels, SDI embedded audio, 24-bit per channel, 48 kHz synchronous L/R RCA analog audio levels at -10 dBu (nominal) Reference 1 x BNC reserved for potential future updates Discovery, Registration, and Control NMOS Rx discovery and control according to standards IS-04 v1.2 and IS-05 v1.0 Ember+ control (no discovery, control only) AJA REST API control (discovery via SSDP or MDNS) Supported over dedicated management Ethernet port and in-band over media ports IP Clock PTP support compliant with PTP PTPv2 / IEEE 1588-2008 SMPTE ST 2059-1 compliant AJA Recommended 10 GigE SFP+ Modules Arista Networks SFP-10G-SR Compatible 10GBASE-SR Fiberstore SFP-10GSR-85 10G SFP+ 850nm Finisar FTLX1471D3BCL (for single-mode 1310nm) Mellanox MFM1T02A-SR 850nm 10G Maximum supported SFP+ power is 500 mW per SFP+ cage