RAJR2SCN

JR2-SCN

RadioPopper

Get set up to remotely trigger and control your flashes as well as more easily metering your lighting with this Jr2 Sekonic Combo Studio Set from RadioPopper. Bundling together a Jr2 Transmitter, Jr2 Receiver for Nikon flashes, and a Sekonic Module, you will be able to equip your camera, flash, and meter with the appropriate technology for remote triggering. The transmitter and receiver are an easy-to-use set that provide remote power control over Nikon i-TTL flashes as well as Alien Bees, White Lightning, and Zeus strobes. Also, the set uses a frequency of 902-928 MHz, has a range of 1500', and has access to four groups. Additionally, the Sekonic Module is installed into select meters and can wirelessly trigger your Jr2-equipped flashes.Dial Operation - Selecting groups Power levels are adjusted by simply rotating the adjustment dial. The adjustment is made to the highlighted group (or groups) with the frame around it. You can highlight all enabled groups at the same time. Adjustments are applied to all enabled groups and settings can be locked inToggle Groups On and Off Enabling and disabling groups is easy. Just click the button for the desired group and it will toggle on and off. When toggling on, the power level will remain where it was when toggled offSimple 9 Stop Max and Min Power Control Power levels are set between 9.0 at maximum to 0.0 at minimum. The increments are based on an EV f/stop scale. One full increment change on the display of your Jr2 Transmitter is equal to one f/stop change on your camera.Save Settings The Jr2 Transmitter provides four memory locations for saving lighting setups. Each memory location can save a snapshot of the present settings, including which groups are enabled, which groups are highlighted for editing, and the power levels of each groupRecalling Saved Settings This allows you to quickly restore previously saved settings and immediately resume shooting with your creative process uninterrupted. You may exit the recall mode at any time without altering the present settings by tapping the P button. The unit will resume normal shooting modeSetting 1/3 Stop or 1/10 Stop Increments Select between either 1/3 stop or 1/10 stop adjustments. When in 1/3 stop mode, each step of rotation of the dial will adjust the power level by 1/3 stop, and similarly in 1/10 stop increments when set to 1/10 settingSetting EV vs % Mode Each group many be independently set to a stop accurate EV scale, or a more approximated percentage % scaleCompatibility The Jr2 Transmitter will trigger the following RadioPopper devices: RP Nano Receiver, PX Receiver (when used on Canon compatible speedlights), JrX Receiver (the group used for controlling JrX Receivers must be changed from EV mode to % mode. You will not have stop-accurate control of legacy JrX Receivers, though you will be able to approximate power level control from the % scale which approximates the dial position of legacy JrX Transmitter units. Remote power control of Nikon or Canon I-TTL/E-TTL/II flashes is possible with purchase of a dedicated receiver