KEKDPS22UTX

KD-PS22UTX

Key Digital

Transmit two HDMI sources to one HDBaseT device using the Key Digital UHD 4K HDMI 2x1 Presentation Switcher and HDBaseT Transmitter. It also features two USB Type-A connectors for integrating a USB 2.0 device like a webcam or keyboard and provides 5V and 500mA of power. A USB Type-B connects a host, like a personal computer, to the device. UHD 4K video can be transmitted over 328' and 1080p over 492' with compatible Cat cable. One HDMI pass-through output allows you to add another display closer to the unit to monitor your sources. Both analog and digital audio outputs can de-embed audio from input sources. Control for the transmitter can be achieved via the bidirectional IR and RS-232 ports, via TCP/IP, or the onboard buttons. LED indicators show the connection status of your sources and power status of the unit. A micro-USB input provides easy access for firmware updates.Features at a Glance Native integration with Key Digital X100Rx, HDBaseT Rx, or UPS52U presentation switchers Supports HDCP 2.2 and EDID management with 15 internal handshakes USB host and device ports create connectivity hub for professional USB cameras and microphones, audio DSP, keyboard, mouse, or touchscreen display with connected computer Add Key Digital CX800 to build programming-free automation system for room display on/off, screen display, PTZ camera control, and AMP220 integration Audio can be returned from connected display or receiver unit and output on external analog and digital outputs 10G pass-through mode enables uncompressed 10.2 Gb/s signal extension Automatic selection of newly detected source and switching from newly disconnected source when auto-switching enabled Network scan and detect populates pre-built GUI including connected display and projector controls via CEC manager Power over HDBaseT via RX and presentation switch unit UHD 4K up to 328', 1080p up to 492' Long range mode extends 1080p signals up to 500' using Cat 5e/6 cable Full buffer system manages TMDS re-clocking and signal regeneration, HDCP authentication to source and display, EDID control handshake, and hot plug detection voltage Bidirectional IR and RS-232 control Control via onboard buttons and TCP/IP