LELTHXC200

LT-HX-C200

Letus35

The Helix Stabilizer and EXO17 Vest Combo from Letus35 equips you with the gear needed to support a Canon C200 camera build and perform smooth handheld shots. The combo includes the Helix stabilizer gimbal which features an optically centered, modular 3-axis design, as well as a flat bottom for easy placement when not in use. The gimbal can be attached to the ESO17 support vest's 9.5" arms in a front-mounted orientation thanks to its load capacity of 28 lb. An included rosette adapter allows you to integrate your C200 grip handle directly onto the Helix gimbal to access camera functions. Helix 3-Axis Camera StabilizerNone The Helix is designed to balance and stabilize around the optical center of your camera/lens combination, allowing you to do nodal point rolls.None As the image sensor movement is reduced significantly compared to off-center stabilizers, image stabilization is improved.None Compatible with Sony a7S and other cameras weighing up to 16 lb.None Bluetooth and RC modules provide control of the stabilizer's pan and tilt functions by a second operatorNone Bluetooth module gives you the ability to connect the Helix to your computer wirelessly, as well as use the BaseCam app to interact with the Helix via an Android device.None You can support the Helix system by holding onto it with two hands; the right handgrip allows you to tilt the Helix, while the left handgrip rotates freely.None Each axis platform of the system allows balance adjustment that reduces operating stress on the unit and the operator, and is indexed in millimeters allowing quick re-sets when switching between lenses.None Re-balancing the Helix after a lens change can be achieved by sliding a single axis forward or back.None Use one axis on top of an optional arm/vest type stabilizer for an auto-horizon solution with an optional 4th axis, or switch to a three-axis setup to go full handheld.None Electrical parts are protected from reverse polarity, overheating, and over-current conditions.None USB interface allows for configuration, control, and firmware upgrades.