NIP100V5PRG

NIP-100-V5PRO-EN-DEC-RG

NiSi

This rose gold and black Christmas Edition NiSi V5 Pro 100mm Filter Holder Kit allows for the convenient use of up to three separately available, 100mm wide, 2mm thick filters along with an included NiSi 86mm Enhanced Circular Polarizer Filter. This kit comes fully assembled and features a black and rose-gold colored aluminum alloy filter holder with a "Limited Edition for Christmas " inscription. When in use, the rose-gold colored surfaces of the filter holder and its components face the camera, while the surfaces of the filter holder and its components that face the subject are black. The filter holder is pre-installed with three plastic filter slots for rectangular filters. Each slot is designed to grip an installed filter only along the surface of the filter's edges. Contact with a filter's front or rear-facing surfaces is avoided, particularly when using graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot.Use of the NiSi V5 Pro 100mm Filter Holder Kit can be easily accomplished by first screwing the included black and rose-gold colored 82mm adapter ring onto a lens with 82mm front filter threads. Black and rose-gold colored step-up rings are included to allow the adapter ring to be used with lenses that have 67mm, 72mm, or 77mm front filter threads, while additional step-up rings are separately available for lenses with 49mm, 52mm, 55mm, 58mm, or 62mm front filter threads. After being fitted onto the adapter ring, the filter holder's pull-and-release locking pin helps to provide a reliable connection that allows the holder to be rotated 360 , further benefiting the use of graduated neutral density and other filters that are enhanced by varied positioning. Together, the 82mm adapter ring and filter holder also accommodate the included NiSi 86mm Enhanced Circular Polarizer Filter while allowing that filter's edges to be easily gripped for convenient installation or removal. This enhanced circular polarizer filter is designed to provide a saturation effect that is approximately 25% greater than a NiSi 86mm Circular Polarizer for select NiSi filter holder kits. When combined with the filter holder and the adapter ring as well as an optional step-up ring, the polarizer filter can be rotated to adjust its effect. In such instances, an external dial on the adapter ring allows for the independent rotation of the circular polarizer. Adapter rings for lenses with 86mm or 95mm front filter threads are also separately available. The combination of either of those adapter rings with the filter holder cannot accommodate a NiSi 86mm circular polarizer filter; however, a polarization effect can instead be obtained by placing a separately available, 100mm wide, 2mm thick polarizer filter between one pair of the filter holder's slots.None Durable, black and rose-gold colored aluminum alloy filter holder with a "Limited Edition for Christmas" inscription provides three filter slots, a configuration that accommodates up to three separately available 100mm wide, 2mm thick filtersEach slot is designed to grip an installed filter only along the surface of the filter's edges, avoiding contact with a filter's front- or rear-facing surfacesWhen in use, the rose-gold colored surfaces of the filter holder and its components face the camera, while the surfaces of the filter holder and its components that face the subject are blackUse of the filter holder can be easily accomplished by first screwing the included, black and rose-gold colored 82mm adapter ring onto a lens with 82mm front filter threadsIncluded, black and rose-gold colored step-up rings allow 82mm adapter ring to be used with lenses that have 67mm, 72mm, or 77mm front filter threadsAdditional step-up rings are separately available for lenses with 49mm, 52mm, 58mm, or 62mm front filter threadsPull-and-release locking pin on filter holder allows for a reliable connection to the 82mm a