TROPTMIC3ETH

OPT-MIC3-ETH

Trinnov

The Trinnov 3D ETH Measurement Microphone is the a powerful acoustic analysis tool, engineered to unlock the full power of the Trinnov NOVA's advanced optimization technology. Designed only for use with the Trinnov NOVA (available separately), this version of the mic features a digital EtherCon connector that plugs directly into the NOVA's front-panel jack. Unlike conventional measurement mics, it not only captures the impulse response of every loudspeaker and subwoofer in your system but also determines their precise three-dimensional position in the room.By providing detailed data including frequency response, phase, group delay, impulse response, distance, azimuth, elevation, and absolute SPL the 3D Microphone supplies the Trinnov Optimizer with a complete acoustic profile of your environment. The result is unmatched calibration accuracy and maximum performance from any monitoring, cinema, or audio playback system.Tetrahedral Layout As each speaker is measured, the resulting sound waves pass through this array of microphone capsules, hitting each one at a slightly different time.Based on this timing, Trinnov's Optimizer technology can triangulate the location of the speaker from which the sound arrived. By placing the microphone at the main listening position and testing each speaker in turn, it builds a three-dimensional map of where the speakers are relative to the main listening position.It uses this information to enable Trinnov's proprietary Remapping technology, which translates from the theoretical rendering of the soundtrack to the specifics of your particular room. Remapping uses the existing speaker array to create a phantom image of the sound coming from the correct location.For Use with Trinnov NOVA The 3D Microphone is used with Trinnov's NOVA. Note that other measurement hardware is not compatible, as it does not provide the information the system requires.Individually Calibrated Every Trinnov microphone is individually tested and measured at the factory.This Model v10 version of the mic includes the compensation file in the microphone itself, which is seamlessly transferred to the processor during the calibration process.This helps achieve measurements with a flat frequency response from 20 Hz to 24 kHz (within 0.1 dB) with 3D localization accurate to 2 of azimuth, 2 of elevation, and less than 0.4" of distance.