4MQCDEXPKITB

QCDEXPKIT - BLACK PANEL

4ms

Expand the capabilities of your clocking system with the black 4ms Quad Clock Distributor Expander Kit, a DIY, four-channel expansion module for the clock divider/multiplier module in Eurorack format. The QCD expander adds a ton of features and is capable of turning the QCD into a programmable nonlinear sequencer.Each channel gets a CV Trigger Delay (pulse width) jack and knob, an additional output jack with three selectable modes, and attenuverters for all CV input jacks. Self-patched evolving rhythms and swing/shuffle patterns are easily obtained, as well as complete control over standard rhythmic patterns. The QCD Kit includes all the components needed to complete the module as well as a black panel.Full DIY Kit Includes all the parts necessary to build a full-featured QCD ExpanderIntermediate/Advanced-Level Kit: Soldering proficiency requiredTools Needed (Not Included):Soldering iron, solderFlush snipsNeedlenose pliers (for removing a component if you make a mistake)5/16" and 3/8 socket driver (optional: pliers will work too if you're careful)Multimeter (for reading resistor values if you don't know the resistor color-code chart)Features Added to Each QCD Channel Multi-mode output jack INV OUT mirrors the tempo of main QCD outputMode Switch for each INV OUT jack:Delayed Trigger ModeInverted Gate ModeShuffle Mode (delayed + original trigger)PW/Delay knob controls trigger delay time on INV OUT jack (or pulse width in Inverted Gate Mode)Also controls Pulse Width of main QCD OUT jackCV input jack for external controlAttenuverter allows for one channel to precisely modulate another channel's delay or pulse widthDiv/Mult CV attenuator knobControls how much the signal on the main QCD's Div/Mult CV jack will modulate the tempoUseful for precisely modulating the speed of one channel with anotherGlobal LED brightness can be adjusted from the front panelEurorack Ready 12 HP Eurorack format moduleMaximum Depth: 0.98" (25mm)Includes power ribbon cable with 10- to 16-pin Eurorack power headersIncudes 16-pin ribbon connection cable to QCDPower consumption: +12V: 44mA, -12V: 30mA