RERP7000MKSL

RP-7000-MK2-SLV

Reloop

The silver RP-7000 MK2 Upper Torque Turntable System from Reloop features a direct-drive motor and rugged construction. It is resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality silver metalic finish. The RP-7000 MK2 features a statically balanced S-shaped tonearm with hydraulic lift and anti-skating mechanism. The tonearm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tonearm comes with a universal connection for pickup cartridge systems (SME). The aluminum LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has been integrated to facilitate a vertical setup (battle position) and by using the buttons on the system's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.Furthermore, using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range 8%. However, the RP-7000 MK2 is also capable of a wider, DJ-friendly 16% pitch range and a massive 50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%). Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals.The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. In addition, the turntable break speed (platter stop) can be adjusted from 0.2 to 6 seconds and the precision-machined, heavy die-cast aluminum platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.None Rigid chassis construction with heavier design and additional reinforcements out of metal, rubber, and molding compound for high-vibration damping and isolationNone Powerful starting torque (adjustable from 2.8 - 4.5kg/cm)None Fine-tuned motor control for further optimization of wow and flutter and rotationNone Height-adjustable tonearm base (VTA) and anti-skating controlNone Satin aluminum material used for tonearmNone Adjustable pitch scale for precise adjustmentsNone Easily replaceable, freely rotatable LED needle light in aluminum designNone Quartz driven DJ turntable with upper-torque direct driveNone Adjustable stop speed (0.2 to 6 seconds)None Precise control of motor with 3 speeds (33 1/3, 45 & 78 rpm)None Precision manufactured, die-cast aluminum turntableNone Rubber inlays to reduce vibrations and background noiseNone Static-balance universal S-shaped tonearm with hydraulic lift and anti-skating mechanismNone Universal connection for pickup systems (SME)None Pitch range 8%, 16%, 50%None Quartz lockNone Additional start/stop button for vertical positioningNone Reverse Function: switch for forward and reverse operationNone Recessed connection cavity for easy installation in cases & seamless adjustmentNone Phono and line out (no ground required)None Removable mains and cinch cableNone Safety mains switchNone Shock-absorbing feet to insulate against vibrations