EVSC205

SC205

Eve Audio

Designed for home or professional studio applications, the EVE Audio SC205 is a two-way active studio monitor that's equipped with a 50W, 5" woofer and a 50W, AMT RS1 tweeter, for a total output of 100W. The SC205 is designed to offer maximum headroom with minimal distortion.The SC205's custom-made 5" SilverCone woofer, driven by a 1" voice coil, provides bass frequency response down to 53 Hz. The speaker's compact size makes it suitable for smaller listening environments, and you can mount the SC205 on a regular microphone or speaker stand using the bottom threaded screw inserts. There are threaded screw inserts on the back for wall mounting using the optional adapter plate. The SC205 features both balanced XLR inputs and unbalanced RCA inputs for flexible connectivity. And a selector knob on the front provides access to volume control and filter settings to help you tailor your monitor to the way you work.Driver Technology The Air Motion Transformer (AMT)Unique driver technology, distinct from other audio drivers, it utilizes a lightweight hand-folded diaphragm that is thinly coated with aluminum. The current of the music signal flows through these conductive strands.The diaphragm is placed in a powerful magnetic field leading to movement in the folds caused by the Lorentz force. Due to the opposing direction of the current, the walls of each single fold work against each other. The air between the folds is squeezed in and out at a ratio of 1:4, compared to the 1:1 ratio of a regular dome tweeter.This results in higher resolution and dynamics in the tweeter section, along with a very low distortion level, allowing superior sound quality with enhanced detail and clarity.5" WooferThe 5" SilverCone woofer is designed for an extended bass response. It features a very stiff diaphragm, which is honeycomb structured and glass-fiber coated. It is driven by a sophisticated low-distortion copper-cap magnet system that uses a 1" voice coil responsible for delivering greater linear excursion. This produces a wider dynamic range.DSP and SMART Knob All EVE Audio monitors feature a high-resolution DSP electronics. A high-quality analog/digital converter from Burr-Brown (24-bit / 192 kHz) converts the analog input signal, supplied via RCA or XLR. DSP provides latency-free filtering while protecting tweeter and woofer against overload across the entire frequency range. When switched on, the volume of the monitor increases slowly, leaving enough time to reduce the source volume if the input signal is too loud.Adjustments to the acoustic environment can be made via the front rotary/pressure encoder (SMART-knob with rotating LED ring). This knob allows you to adjust system volume and filters (low shelf, mid EQ, and high-shelf) for room variables. All settings are displayed on the LED ring, providing instant information about the selected values. The brightness of the LED ring can be adjusted for dark studios or video applications.High-quality Class-D amplifiers complete the system and deliver enough power for the demands of modern music production. Selected volume and filter settings can be independently set with dip switches on the rear of the amplifier.SMART-Knob Standby ModePress and hold the control for three seconds to put the monitor in Standby mode. The volume will decrease gradually, while the LED ring lights up around the Volume control. Next, the LED on the right will remain dimly lit and the power consumption is reduced to 1W.VolumeThe volume can be adjusted by turning the knob.MuteTo put the monitor in Mute Mode, turn the volume control counterclockwise until you reach the minimum level. When the LED on the left lights up dimly, the Mute Mode is activated.SettingsPress the SMART-knob once to enter the Settings menu. Here you can set different filters and  the behavior of the LED ring. The LED of the currently active function will blink.High Setting The high-shelf filter helps you adjust frequencies above 3 kHz in 0.5 dB increme