4MSCMBOKIT

SCMBOKIT

4ms

Add features and functionality to the Shuffling Clock Multiplier with the silver 4ms SCM Breakout Kit, a DIY Eurorack module that's designed exclusively for the Shuffling Clock Multiplier (SCM).The module adds a host of new features for controlling shuffle/swing patterns (Slip, Shuffle, and Skip), as well as Pulse Width, Mute, and 4x Fast. Each feature has a CV jack and manual knob. The Mute and 4x Fast buttons act as inverters of the gate signal on their respective jack, and light up to indicate on/off status. The SCMBO Kit includes all the components needed to complete the module as well as a silver panel.Full DIY Kit Includes all the parts necessary to build a full-featured QCD ExpanderIntermediate/Advanced-Level Kit: Soldering proficiency requiredTools Needed (Not Included):Soldering iron, solderFlush snipsNeedlenose pliers (for removing a component if you make a mistake)5/16" and 3/8 socket driver (optional: pliers will work too if you're careful)Multimeter (for reading resistor values if you don't know the resistor color-code chart)New Features for Version 2 Mute and 4x Fast are LED buttonsPressing Mute or 4x Fast inverts the signal on the jackKnobs are centered straight up (12:00)Rotate and Slip knobs attenuate the breakout jacks, and the corresponding jacks on the main SCM module are added to this attenuated signal. If nothing is plugged into the Rotate or Slip jacks on the breakout, the knob functions as a manual control (same as it did on version 1)Expanded Features CV Shuffle jack and knob selects which beats are slipped by CV Slip (default=every other beat)CV Pulse Width jack and knob controls width of output pulses (default=50%)CV Skip jack and knob omits certain beats in a pattern (default=no skip)Resync Trigger inputAdditional CV Rotate and CV Slip jacks add to main SCM's Rotate and Slip jacks4x Fast CV Gate jack and switch speeds up multiply-by amountsMute CV Gate jack and switch stops any more beats from startingEurorack Ready HP Eurorack format moduleMaximum Depth: 1" (25mm)Includes 16-to-16 pin cable (to connect to SCM)Power draw maximum 14mA extra from the +12V (no -12V or +5V draw). Power is taken from the main SCM module