4MSCMKIT

SCMKIT

4ms

Get creative with tempos using the silver 4ms Shuffling Clock Multiplier Kit, a DIY Eurorack module that produces eight multiplied clock tempos from a single input clock. The multiplied clock signals range from x1 to x8 (x32 using the separately available breakout module) and include five slipped/shuffled/skipped clock outputs including x3, x4, x5, x6, x8, as well as three steady clock outputs including x1, x2, and x8.The Rotate CV jack reassigns the multiplication number on all jacks, while the Slip CV causes particular beats to land ahead in time. The SCM Kit includes all the components needed to complete the module as well as a silver panel.Full DIY Kit Includes all the parts necessary to build a full-featured QCD ExpanderIntermediate/Advanced-Level Kit: Soldering proficiency requiredTools Needed (Not Included):Soldering iron, solderFlush snipsNeedlenose pliers (for removing a component if you make a mistake)5/16" and 3/8 socket driver (optional: pliers will work too if you're careful)Multimeter (for reading resistor values if you don't know the resistor color-code chart)At a Glance Multiply-by-1 to Multiply-by-32 (x32 with optional breakout module), on 8 output jacksFive Slipped/Shuffled/Skipped clock outputs (S3, S4, S5, S6, S8). Each is based on a multiple of the input clock frequency (x3, x4, x5, x6, and x8, respectively)Three steady clock outputs (x1, x2, and x8), which are not affected by Slip/Shuffle/Skip effectsCV Rotate jack to shift multiply-by amount on all jacksCV Slip causes particular beats to land ahead in timeConnects to the SCM Breakout for controlling more features: Pulse Width, Shuffle pattern, Skip, Resync, Mute, and 4x FastISP header: Connects to in-circuit programmer such as AVR ISP MKII for reprogramming codeMaximum input frequency 3 kHzJacks Clock Input (3.5V to 15V clock, rising-edge triggered)CV Rotate (0V to +5.1V input)CV Slip (0V to +5.1V input)Multiplied clock outputs (8 jacks where R is the CV rotation 0 to 7):Multiply-by (1+R)Multiply-by (2+R) and slip/shuffle/skipMultiply-by (3+R) and slip/shuffle/skipMultiply-by (4+R) and slip/shuffle/skipMultiply-by (5+R) and slip/shuffle/skipMultiply-by (6+R) and slip/shuffle/skipMultiply-by (7+R) and slip/shuffle/skipMultiply-by (8+R)Eurorack Ready 4 HP Eurorack format moduleMaximum Depth: 1.39" (35mm)Includes power ribbon cable with 16-pin Eurorack power headerPower consumption: +12V: 33mA, -12V: 4mA