TRSP2200RMXL

SMART2200RMXL2U

Tripp Lite

The SMART2200RMXL2U SmartPro Expandable Rack/Tower UPS System from Tripp Lite is a line interactive voltage regulation and UPS system, built to the stringent requirements necessary for network-grade surge suppression. The UPS offers battery-derived sine wave AC output during power failures and extreme voltage variations. Thanks to line interactive Automatic Voltage Regulation (AVR), two levels of voltage boost are available during brownouts and one level of voltage cut is available during overvoltage conditions, ensuring that a 120V current is maintained over an input range of 83-145V. The UPS features a standard NEMA 5-20P input plug, 4 NEMA 5-15R receptacles, and 4 NEMA 5-15/20R receptacles. You'll be able to connect the UPS to a computer via USB or serial for monitoring by Mac OS X and Windows. You also have the option of installing an SNMP/Web Card for network management. You can monitor conditions via all three interfaces simultaneously. The included PowerAlert software allows you to monitor equipment load levels, self-test data, and utility power conditions. The Emergency Power Off (EPO) interface shuts down connected equipment safely in the event of a power failure, and an audible alarm and front-panel LEDs make you aware of status information regarding line and battery power operation. The internal battery is able to provide 16 minutes of backup power at half load.None SmartPro line interactive UPS system is ideal for voice, data, medical, and industrial networking applicationsNone Line interactive Automatic Voltage Regulation (AVR) offers two levels of voltage boost during brownouts and one level of voltage cut during overvoltagesNone Maintains continuous operation through blackouts, voltage fluctuations, and surgesNone Corrects line voltage conditions as low as 83V and as high as 145V back to selectable 100V/110V/120V nominal valuesNone Standard internal battery set offers 16 minutes at half load (800W) and 6 minutes at full load (1600W)None Optional BP48V24-2U and BP48V60RT3U external rack/tower battery packs enable extended runtime operationNone Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 19 inchesNone Ships with all mounting accessories for 4-post rackmount installationNone Optional 2POSTRMKITWM enables 2-post rackmount or wallmount installationNone Optional 2-9USTAND accessory enables small-footprint upright tower placementNone Network interfaces support simultaneous communications via built-in USB, DB9 serial, and SNMPWEBCARD slotNone HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS XNone Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, with the built-in ability to shutdown any number of additional servers over IPNone UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control, and remote rebootNone Built-in Emergency Power Off (EPO) interface with cableNone NEMA 5-20P input plug; NEMA 5-15R and NEMA 5-15/20R output receptaclesNone Integrated 3-bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (Each bank controls 1 outlet per load bank)None Front panel LEDs offer current monitoring and battery charge level informationNone UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user requiredNone $250,000 connected equipment insurance (USA, Canada, and Puerto Rico only)