APSRT3000XLA

SRT3000XLA

APC

Keep critical systems up and running with the Smart-UPS SRT 3000VA LCD 120V Rack/Tower Uninterruptible Power Supply from APC. Designed to provide surge protection and backup battery power, this UPS features one NEMA L5-30R and eight NEMA 5-20R outlets. Featuring an output capacity of 2700W and an apparent power rating of 3000VA, this UPS has a nominal input and output of 120V at 50/60Hz. A 30A circuit breaker protects your connected equipment in the event of a surge or overage, and this unit has a surge energy rating of 340 Joules. Sporting an integrated LCD screen, the SRT 3000VA provides on-screen alerts and incorporates an RJ45 serial port and USB Type-A port for communications. Furthermore, this UPS can be used with SmartSlot adapter cards for expanded network management. The backup battery is user-replaceable and hot-swappable for easy manageability. A power cord terminates in a NEMA L5-30P plug, and the Smart-UPS SRT 3000VA can be deployed as a tower or in a server rack.Battery Failure Notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance.ECO Mode Operating mode that bypasses unused electrical components in good power conditions to achieve high operating efficiency without sacrificing any protection.Green Mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.LCD Graphics Display Text and mimic diagrams that display modes of operation, system parameters and alarms.Rack/Tower Convertible Design Protects the initial investment in the UPS when migrating from tower to rack-mount environment.Scalable Runtime Allows additional run time to be quickly added as needed.Hot-Swappable Batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.Intelligent Battery Management Maximizes battery performance, life, and reliability through intelligent, precision charging.Automatic Internal Bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.Temperature-Compensated Battery Charging Prolongs battery life by regulating the charge voltage according to battery temperature.Automatic Restart Automatically starts up the connected equipment upon the return of utility power.Flash-Upgradeable Firmware Install maintenance releases of firmware remotely using FTP.Disconnected Battery Notification Warns when a battery is not available to provide backup power.Predictive Failure Notification Provides early-warning fault analysis ensuring proactive component replacement.Audible Alarms Provides notification of changing utility power and UPS conditions.User-Replaceable Batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair or MTTR.Automatic Self-Test Periodic battery self-test ensures early detection of a battery that needs to be replaced.Resettable Circuit Breaker Enables a quick recovery from overload events.Safety Agency-Approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Cold-Start Capable Provides temporary battery power when the utility power is out.Frequency and Voltage Regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.Generator Compatible Ensures clean, uninterrupted power to protected equipment when generator power is used.Input Power Factor Correction Minimizes installation costs by enabling the use of smaller generators and cabling.Power Conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.Serial Connectivity Provides management of the UPS via a serial port.SmartSlot Customize UPS capabilities with management cards.LED Status Indicators Quickly understand unit and power status wi