NEC6FOUS4KLC

ST-C6FOUSB4K-LC

Network Technologies

Extend 4K x 2K at 30 fps and KVM up to 328' via Cat 6/6a/7 or up to 6.21 miles via LC single-mode fiber optic cable using the XTENDEX 4K 10.2 Gb/s HDMI/USB & KVM Extender from Network Technologies. The versatile extender consists of a local unit, which connects to your computer, and a remote unit that connects to an optional monitor with an HDMI port, providing bidirectional 3.5mm stereo audio speakers and a microphone, full-duplex RS-232, and up to four USB devices (keyboard, mouse, flash drive, HDD, or display). The system supports EDID passthrough and comes with mounting brackets.Signal Transmission Using Cat 6/6a/7 cable, you can extend 4K up to 328' and 1080p or 1920 x 1200 up to 492'Using a Gigabit switch, you can extend up to a total distance of 656' between the transmitter and receiver the transmitter and receiver can each be extended 328' from the switchUsing a single-mode 9-micron cable, you can extend signals up to 6.21 milesUsing multimode 50-micron cable (OM2 and above), you can extend signals up to 1640'HDMI Features HDMI 1.436-bit Deep ColorRGB, YCbCr 4:4:4, YCbCr 4:2:2Dolby, DTS, Stereo, and LPCMVideo bandwidth up to 340 MHz (10.2 Gb/s)Additional Details HDCP 1.4 compliantFour USB 2.0 ports for keyboard, mouse, flash drive, HDD, or touchscreen displayKeyboard and mouse are hot-pluggableSupports plug-and-play specificationUsing an unmanaged Gigabit network switch, you can extend up to 32 pairs in point-to-point connectionsUse the DIP switch on the transmitter and receiver to specify the ID for the unitTransmitter and receiver units with the same ID will connect to each other. (point-to-point only)Supports full-duplex RS-232 up to 115,200 baudEDID passthrough for the support of any HDMI display deviceMounting brackets are included for easy surface/wall mounting