4MSTRTRGSMPL

STS

4ms

Record and playback high-resolution audio files with the 4ms Stereo Triggered Sampler, a high-fidelity two-channel stereo sample recorder and playback module with advanced performance capabilities in Eurorack format. The module features two independent playback channels with mono and stereo modes for flexibility in operation and mixing.The STS can record and play back stereo WAV files up to 96 kHz / 32-bit, and a maximum of 600 samples can be loaded at one time from the removable microSD card. All sample parameters (pitch, sample file selection, length, and start position) are CV controllable, and trigger jacks for play/record and reverse allow for synchronization. The Stereo Triggered Sampler module ships with a ribbon power cable, mounting screws, a microSD card, and an SD-card adapter.Stereo Triggered Sampler A maximum of 600 samples can be loaded at once, arranged into banks of 10 samples each. Samples and banks can be rearranged on the fly using the simple on-oard Edit features. Newly recorded samples can be instantly played back and repitched, reversed, chopped up, etc. The result of which can even be bounced down and rerecorded to as a new sample. Sample files are limited to 4GB each, which is over 6 hours at 44 kHz / 16-bit / stereo.Hundreds of samples included on microSD cardExtremely quiet, low noise and low jitter designStereo or Mono Operation:Stereo mode: Two stereo files are mixed and played through the L and R output jacks (L+L and R+R)Mono mode: Each file is mixed to mono and output through the channel's output jack (L+R and L+R)Firmware can be updated by playing an audio file into the STSTwo Independent Playback Channels Each playback channel has a knob and CV jack for Sample File selection, as well as a Start Position knob and CV jack for controlling where in the sample playback will begin. The Length knob and CV jack determine how much of the sample is played back: from tiny grains, to percussive hits, to longer loops, or the entire file. These are powerful tools for rearranging a sample, joining multiple samples, and creating dynamically resized loops within a larger sample. Combined with the Play Trigger jack and the 1V/oct jack, the STS can be two complete multitimbral pitch-tracked stereo voices. There's also a Reverse button and jack for backwards playback, and an End Out jack for synchronizing loops, or cascading sample playback with other events.Each channel can output in mono or stereo through the shared L/R jacksPlay button / trigger jack: Tapping the button or receiving a trigger starts/restarts the sampleWhen Length is set to All, the Play button starts/stops the sampleSample CV/knob: Select a sample within the channel's bank1V/Oct CV and Pitch knob: Playback pitch (-10 to +4.3 octave range)Start Pos CV/knob: Position in the sample to begin playback (loop start point)Length CV/knob: Playback time (loop end point)Length knob at max: Entire file is playedLength knob 50 99%: 200 ms to 5 sec of the sample is played (beginning at the Start Position)Length knob Length Reverse button/jack: Toggles forward/backwardsBank button: Selects channel's bankTip: Hold Bank and turn the Sample knobs for fast selection of bankEdit button allows basic onboard editing features:Set loop/trim points with Scrub Start and Scrub EndSet gain (boost/cut from 10 to 500%)Reorganize samples with Next FileMove samples around within a bankAssign files from any folder on the microSD card into any sample slot (subfolders are ignored)Copy sample to multiple slots, each with their own Loop/Trim/Gain settingsReverse+Start Pos button/knob combo allows for setting volume of each channel independently.Maximum file size for playback: 4GB per file (6.7 hours per file at 44.1 kHz / 16-bit / stereo)microSD Card is hot-swappable when Busy light is off: no power-down required to change cards.Samples that are preloaded into memory can continue playing while card is swapped.Recording Channel Whether you patched 47 modules to create the ultimate