INUMIDI3U

UMIDI-3U

intellijel

Control and sync your Eurorack modular from your computer, iPhone/iPad, or hardware MIDI device with the intellijel MIDI, a USB/DIN MIDI voice and clock interface that provides all the essentials to control and sync your Eurorack modular. No menu diving or configuration scripts, just two buttons. The connectivity, features, and compact size allow the integration of your modular system with the rest of your studio while not taking up too much space in your case.The upper clock section features a dedicated 16th note clock output, ideal for synchronizing a Eurorack sequencer like the Metropolix. A second clock output with selectable divisions can be used when different sync events are needed. The run and reset outputs can be used to reset your Eurorack sequencers in tandem with any external sequencer or DAW. The lower half of the MIDI gives you everything you need to control a single-voice synth via MIDI. The module includes a ribbon power cable.At a Glance High-speed ARM processor for low latency and jitter.DIN or USB MIDI input.Two clock outputs, one with selectable divisions.Sequencer sync via run and reset outputs.Precision 0 to 10V note pitch output with pitch bend and portamento CC support.Gate and trigger outputs for envelope triggering.Mod wheel and continuous controller (CC) outputs for additional modulation.Firmware updates and configuration over USB.Controls DIN MIDI Input: For connecting to 5-pin DIN MIDI outputs of controllers, synths, drum machines etc.USB Connector: For connecting to computers, iPhones, iPads, other USB MIDI hosts.Learn: This button can be used to learn the MIDI channel on which the MIDI will accept notes and controller values. Clock Division ( ): The division button sets the clock division of the MIDI clock that is sent from the Clock output. The default setting is 6, the same as the 1/16th output. Pressing the button repeatedly cycles through the different divisions: 6 (1/16 notes), 12 (1/8 notes), 24 (1/4 notes), 48 (1/2 notes), 96 (whole notes, eg: every measure), 1 (24 PPQ), 3 (1/32 notes).Outputs 1/16th: Trigger output outputs a divided MIDI clock with a fixed division of 6, equivalent to 1/16th notes. Suitable for connecting to sequencer clock inputs such as the Metropolix.CLK: Trigger output which outputs a divided MIDI clock with a division set by the button.RUN: Gate output, which goes high when a MIDI Start or Continue message is received and low when a stop message is received.RESET: Trigger output which sends a trigger when a MIDI reset message is received.PITCH: 1 V/octave CV output with a range of 0 to 10 V. The voltage output is determined by the pitch of the last played note and the pitch bend control. MIDI note 0 (C-2) maps to 0 V and note 120 (C8) maps to 10 V.MOD: CV output with a range of 0 to 5 V. The voltage is proportional to the position of the mod wheel control. Suitable for connecting to the CV input of a VCA controlling modulation depth.VEL: CV output with a range of 0 to 5 V. The voltage is proportional to the velocity of the last played MIDI note. Suitable for connecting to the LEVEL input of an envelope generator such as the Atlantis envelope section or Dual ADSR.CC: CV output with a range of 0 to 5 V. The voltage is proportional to the value sent by MIDI CC #2.GATE: Gate output, which is high when a note is being played. Suitable for connecting to the GATE input of an envelope such as the Atlantis envelope section or Dual ADSR.TRIG: Trigger output, which sends a trigger when a MIDI Note On message is received. Suitable for connecting to the trig input of an envelope generator such as the Atlantis envelope section or Dual ADSR.Eurorack Ready 6 HP Eurorack format moduleMaximum depth: 1.6" (40mm)Includes power ribbon cable with Eurorack power headersPower: +12V: 47mA, -12V: 3mA