KRVP770

VP-770

Kramer

The Kramer VP-770 is a 1RU form-factor, 8-input presentation switcher and scaler that is designed to allow you to integrate a variety of different audio and video sources into your A/V system. It features two HDMI, two VGA, a DisplayPort, a component, and two composite video inputs along with discreet audio inputs for each video source as well as a mic input. It will scale as well as convert the frame rates of the incoming video sources to conform to a common standard for output to up to four displays. It features two HDMI outputs, a VGA output, and a DGKat Ethernet connector allowing you to send an HDMI signal over an Ethernet cable to a compatible Kramer receiver balun for applications where were long cable runs are required. In addition, it features digital S/PDIF and analogue audio out as well as an amplified, 10W stereo speaker connector. With HDPC compliance and EDID management, the VP-770 will accept video in most HDTV and resolutions and frame rates as well as NTSC and PAL standard definition analogue video. Devices that can be connected to the a switcher/scaler include computers, DVD and Blu-ray players, document cameras, media players, camcorders, video production switchers, or even legacy analogue devices such as VCRs. The HDMI and VGA outputs can be used to drive display devices including multimedia projectors, TVs, commercial displays, and computer monitors.EDID Management The EDID (Extended Device ID) data for a selected master input can mapped to one of the outputs to help ensure proper "handshake"HDCP Compliant HDMI sources with HDCP (High Definition Content Protection) encryption will only pass to the HDMI output on the VP-770Fade-Thru-Black (FTB) Switching When switching, the image fades to black giving the new source a chance to establish sync, the new image then fades in for a seamless transitionMultiple Simultaneous Video Outputs Both VGA ports, the HDMI port, and the DGKat HDMI balun port are active simultaneously, allowing you to connect up to four display devices without using a distribution amplifier or splitterDual Window Display Presets for picture-in-picture (PIP), picture-and-picture, and split screen presentation modes, as well as customized window layouts. Both the main and PIP window can be magnified up to 1600%Luma Keying via PIP Window Allows you key out a portion of the main image based on luminance value allowing you to insert backgrounds and overlaysProcAmp and Image Filters ProcAmp allows you to individually adjust color, sharpness, contrast, brightness, and gamma for each input Time-base corrector (TBC) helps stabilize jittery, unstable video sources Noise reduction with temporal, block, mosquito, and comb filtering 3D comb filter provides improved color separation for composite video inputs IR, Ethernet, and RS-232 Controls You can control the VP-770 directly using the on-screen display (OSD) accessed via buttons on the front panel, from a computer using the RS-232 serial interface, or over a network using IP protocolAudio Delay Manually adjustable audio delay allows you to bring audio and video into syncMultiple Aspect Ratio Selections Select from follow input, follow output, best fit, letterbox, and overscanDe-interlacing Supports 3:2 and 2:2 pull-down and features 24sf handling