PRXTMBC2T

XT-MBC2T

ProX

Designed for ceiling I-beam installations, this I-Beam Clamp from ProX connects to 3 to 8" I-beams and provides a link to connect stage slings and chains to support loads up to 2 tons. The clamp is made from durable steel and features a built-in suspension bar with a 1" diameter for easy connection. The 11 lb clamp is tagged for traceability.Safety and Maintenance Notes Using beam clamps safely:Ensure that the beam clamp is of correct capacity for the load being lifted and that the beam will not be damaged by localized overloading.Ensure that the clamp is fitted correctly over the center of gravity of the item being lifted and will not be subjected to side loading.Before lifting a load, ensure that the clamp has been tightened and that the lifting appliance is fitted correctly into the eye of the clamp.In-service inspection and maintenance:Ensure that beam clamps are kept clean and moving parts are lubricated.Regularly inspect beam clamps for wear, damage, distortion, cracks, and any defects likely to cause danger.If any of the above defects are found, remove the beam clamp from service and refer to a competent professional.